Electronics Engineers For Hire

  • Electronics
Suggestions:
more

Countries

Specific Location

Exams

Hourly Rate (USD)

Rating

Online

  • Hire xiaoqideng
    5.5
    26 reviews $30 USD per hour
    Dear Client. Thank you for your kindly visiting to my summary. As High-Skilled Embedded System Designer, Developer and Manager, I have full experience and rich knowledge of Embedded System Development. 1) Rich Schematics and PCB designer. - Over 10 years designing experiences using Altium Design Tool and Simulation...
    Dear Client. Thank you for your kindly visiting to my summary. As High-Skilled Embedded System Designer, Developer and Manager, I have full experience and rich knowledge of Embedded System Development. 1) Rich Schematics and PCB designer. - Over 10 years designing experiences using Altium Design Tool and Simulation Tools. 2) Firmware Development Experiences. - Rich knowledge and experiences at C/C++/Embedded C. - I like using various of MPU, ARM, PLD and embedded system equipment. MCUs : STM32 family, PIC16F/18F/33F, Atmega family, 8051 family, NRF51822/52832, MSP430, LPC, Atmel, CC2540/CC2541, CC3200, MPU6050, Wifi-MCUs : ESP8266/ESP32. Arduino Linux-Embedded: - Experience with Keil, IAR, Atmel Studio, QT IDE, Arduino, Visual Studio. - Rich experiences at variant peripherals. UART, I2C, SPI, USB, Ethernet, Bluetooth, Wifi, Gyro/Accelometor, GPS, GSM/GPRS, xBee, Zigbee. - LED controlling wih Neopixels. I'm always work on my client's timezone. Thank you for your time. less
  • Hire mechatronicsengr
    5.9
    33 reviews $25 USD per hour
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory...
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory Automation and Remote Inventory Management. - RFID Based Loyal Card for Loyal Customers. - Bluetooth Communication between MCU and RFID Host. - Vehicle Tracking using GPS and Accelerometer. and a lot more. I have expertise over all communication protocols of Microcontroller: - SPI (Master/Slave) - UART - USART - I2C (Master/Slave). - Ethernet - Wifi - Bluetooth etc.. I am expert in interfacing sensor modules with microcontroller. I believe in providing superb quality provided that the deadlines are met. Moreover, during the course of my project I would keep you updated regarding the status. Service Description: * Wireless Interfaces (ISM Band FSK, OOK, XBee, ZigBee, TI 2.4GHz, Bluetooth, WiFi, etc) * LED lighting control * DC Motor Control and Actuator Control Solutions * Touch Sense * RF Energy Detection Systems * Home Automation systems * Weather Stations (Temperature, Pressure, Humidity, Wind Speed, Positioning, and Ambient Light sensing) * GPS Tracking Systems * USB Based Embedded Products * Power Over Ethernet (POE) Solution * On Board / off board DC/DC Low quiescent current, Linear and Switch Mode Power Supply solutions for embedded applications ----------------------------------------------------- * PCB Design (Printed Circuit Board) * Schematics and Bill of Material * Block Diagram and Design Documentation * Suggesting you PCB and PCBA vendors or managing the PCB and PCBA process. * Part Selection, Parts Sourcing * Manufacturing File generation * High Speed, High Density Multi-Layer PCB Layout * Embedded Software / Firmware design development * 3D Step Models of the PCB for Integration with MCAD tools. * Board Bring-up: Test codes in C/C++. * DSP Design (Digital Signal Processing) * Power / Signal Integrity Analysis * System / Hardware Design -------------------------------- * Circuit Simulation Training using Altium, MultiSim and Proteus * Embedded Firmware Design Training (C/C++, Assembly) * Schematics and PCB Design training less
  • Hire BKTechnology
    6.5
    19 reviews $20 USD per hour
    ***********************QUALITY - ON TIME ************************ We are a design team with 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, Software and +7 years experience of 3D Design (3D printing, CNC and Mould). Our key...
    ***********************QUALITY - ON TIME ************************ We are a design team with 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, Software and +7 years experience of 3D Design (3D printing, CNC and Mould). Our key skills are IoT, Embedded, Digital & Analog, High-speed, Memory, WIFI, GPRS, GPS, RF, BLE... We have designed up to +24 layers PCB. Experience designing high density boards include FPGA, EMCC, DDR, PCIE, SATA, ETH, BLE, WIFI, HDMI, USB, QSFP, LVDS...etc. Also, we provide programming for MCU, FAB, ASSEMBLY & TESTING services. We can make any prototypes, even support mass production. We use the expertise of the following software: - Allegro/Orcad - Altium. - Eagle - Mentor Pads. - Expedition - Solidworks/ Autocad. - C/C++ - Android, IOS... We provide Service & Support even after completion of the projects. "We are ready to give you the best" **********Best regards******* less
  • Hire levstremetskyi80
    6.3
    29 reviews $35 USD per hour
    ⭐ ⭐ ⭐ ⭐ ⭐ As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years. Here are some of the experiences that I worked ago. - Exceptional C++/C /C# programming skills. - Strong foundation in simulation MATLAB - FPGA design using Verilog/VHDL (Xilinx...
    ⭐ ⭐ ⭐ ⭐ ⭐ As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years. Here are some of the experiences that I worked ago. - Exceptional C++/C /C# programming skills. - Strong foundation in simulation MATLAB - FPGA design using Verilog/VHDL (Xilinx ISE/XPS/SDK/Vivado, Altera Quartus, iCECube) - ARM, DSP, MCUs, Arduino experience. - Arm cores: ATSAM, STM32, PIC32, A13, FreeScale, MSP, NXP - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Single board computer: Raspbery pi, Beaglebone, NanoPi - Strong with UART, I2C, SPI, BLE,BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full experience for BLE And here are some of tools that I normally use, but not limited to: - Altium Designer, Cadsoft Eagle, Cadence Allegro, OrCAD, Ansoft, ADS, HFSS, MATLAB, Quartus II, CCS, Micro C, etc. Once you hire me, expected me to help your business like I 'm growing it as my own. I would love to hear from you. less
  • Hire ExpertEngineer7
    5.9
    14 reviews $25 USD per hour
    *SENIOR ELECTRICAL ENGINEER* I am Electrical Engineer with 5 years of experience in innovative product development projects. I have worked in MATLAB, IoT domain and mobile app development in various projects. Vast experience on Arduino/Raspberry Pi development boards based projects. Provide services in student...
    *SENIOR ELECTRICAL ENGINEER* I am Electrical Engineer with 5 years of experience in innovative product development projects. I have worked in MATLAB, IoT domain and mobile app development in various projects. Vast experience on Arduino/Raspberry Pi development boards based projects. Provide services in student projects/assignments related to electrical, electronics and communication engineering. My skillset includes: @ Embedded & IOT Devices (Wearable, Control Devices) @ Arduino, ARM, Raspberry Pi, Texas Instruments, STM32F @ Wireless Technologies (BLE, WiFi, RF, GSM, GPS, ESP32/ESP8266, nRF51, nRF52) @ Sensor interfacing with MCUs @ Cloud Solutions for Electronics Devices @ Robotics & Automation (PLC, SCADA, Dobots) @ PCB Designing, Prototyping and Manufacturing (EagleCAD, KiCAD, Altium) @ MATLAB / Simulink @ 3D Modeling (SolidWorks, AutoCAD, 3D Casing) less
  • Hire Ivan927
    3.3
    2 reviews $30 USD per hour
    I have expertise in the following areas: 1. Programming in C,C#, Visual Basic. 2. Mobile programming 3.Website development, 4. AutoCAD,Solidworks. 5. Electronics and Electrical projects. 6. Circuit analysis and troubleshooting. 7.Programming debugging and code optimization. 8. Product development and quality...
    I have expertise in the following areas: 1. Programming in C,C#, Visual Basic. 2. Mobile programming 3.Website development, 4. AutoCAD,Solidworks. 5. Electronics and Electrical projects. 6. Circuit analysis and troubleshooting. 7.Programming debugging and code optimization. 8. Product development and quality assurance. 9. Procurement and sourcing of components. 10. Design analysis and optimization. 11. Software development, socket programming , database servers. I have eight years of experience in the above fields and can turn your ideas into working projects and prototypes. I am available all the times to communicate with you and assure 100% quality work. I am dedicated and Self driven professional with clear goal oriented attitude. Lets Work Together to make things happen! less
  • Hire Sourabh071092
    3.2
    2 reviews $20 USD per hour
    Expert 2D CAD engineer, 3D modeller, sketch artist & illustrator with 8years of experience. My services: - 2D CAD Drawings/Fabrication drawings/Section details/Isometric views - Technical drawings/Datasheets/Schematics/Exploded diagrams - Concept sketches/Illustrations/Instruction manuals/Flip-books/Comic designs -...
    Expert 2D CAD engineer, 3D modeller, sketch artist & illustrator with 8years of experience. My services: - 2D CAD Drawings/Fabrication drawings/Section details/Isometric views - Technical drawings/Datasheets/Schematics/Exploded diagrams - Concept sketches/Illustrations/Instruction manuals/Flip-books/Comic designs - Layout plans/Floor plans/Site plans/Mapping/Elevations - 3D Modelling/Rendering - Estimation & Costing work/BOQ preparation - Photoshop/Photo editing/ Photo retouching - Vectorisation/Presentations/Data Entry Software skills: AutoCAD, Inventor, SolidWorks, CATIA, 3Ds max, Maya, VRay, MRay, Zbrush, Keyshot, SoftPlan, illustrator, Photoshop, MS Office & Acrobat pro . Revisions offered: As per individual project conditions. Replies within: Less than 15 minutes less
  • Hire Euroaccount
    5.3
    9 reviews $30 USD per hour
    I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using...
    I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using Adams, Nastran, Patran HARDWARE - Schematic Digital, Analog, Power electronics. - PCB layout, routing and assembly using altium designer or Eagle CAD, Allegro. - Product design and mechanical design in Solidworks. INDUSTRIAL - Power supplies (AC/DC/AC) and Electric Drives (240/480VAC) using SMPS - CVCF, DC-DC Converter, Inverter and Rectifier. - Bio-metric device such as Fingerprint identification system - Glucose Monitoring device development. - IPS system using UWB band less
  • Hire mos3d
    5.2
    20 reviews $25 USD per hour
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes...
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes : 1-Micro-controllers with variant types like (Pic ,ARM, AVR , 8051) 2- development kits (Arduino, Mbed,Raspberry pi ) 3- Digtal design and Verification using (VHDL, Verilog and system Verilog) 4-FPGA prototyping using (Xillinx and Altera) FPGAs as well as 5-electronics hardware implementation 6-PCB design. 7- Programming languages: Python, C/C++, JavaScript, HTML, CSS. 8- Sensing : Wired(I2C, SPI, CAN, Modbus, MQTT, RS232/485, SNMP), Wireless(WiFi, BLE, RF, Xbee) sensor managements with Raspberry Pi/Arduino. I'm always committed with time and specifications for the required jobs and care about quality of delivered work less
  • Hire ShunJohn
    5.2
    12 reviews $25 USD per hour
    I am a expert having good experience in schematic circuit, PCB design branch and software. I am using Altium design tool for schematic circuit and PCB design. I have been working in Embedded system including wireless network and several MCU and CPU for last 10 years. Also I developed small and large industrial UPS...
    I am a expert having good experience in schematic circuit, PCB design branch and software. I am using Altium design tool for schematic circuit and PCB design. I have been working in Embedded system including wireless network and several MCU and CPU for last 10 years. Also I developed small and large industrial UPS using DSP and FPGA. And I developed industrial Grid-Connect inverter and CNC unit including industrial fieldbus. I have developed several portable electronic devices that needed the battery charging and management. less

Hey , here are some offline freelancers

Hey , here are some offline freelancers matching ""