Arduino jobs

... Ideal skills and experience: - Experience in designing and developing digital pens - Knowledge of integrating 4G network support and micro webcams - Proficiency in software development for controlling the digital pen. - Programming languages like C/C++, Python, or specific micro-controller programming languages (e.g., Arduino) would be relevant. - You would need to write code to interface with the camera module, handle wireless connectivity, process image data, display information on the LED screen, and manage overall device functionality. - Electronics: A solid understanding of electronics is essential to select and integrate the necessary components. This includes knowledge of micro-controllers, sensors

This task requires the design and simulation of optical plethysmography. This task requires design and simulation of a digital, Arduino based plethysmography sensor that can detect pulsatile blood waveform and pulse rate from finger. It requires design and simulation in multisim online, tinker cad and physical implementation on breadboard. A full explanation of design needs to be included so that I can implement the physical circuit, you will provide simulated results. A report is to be included, explaining the design process, code, simulation results etc PCB design also needs to be implemented using easyeda online software. I will provide more information through message.

...using an Arduino microcontroller. The main purpose of the USV is surveillance, and it should be remote-controlled. I would also like the USV to have GPS capabilities for better tracking and navigation. this is the project for USV, the whole system is using 2 arduino mega as microcontroller (1 at vessel and 1 at remote control unit) and LoRa module to connection between them. on the vessel there are gps module. Refer the block diagram for more understanding For the vessel: 1. Motor 2. Servo (rudder) 3. Light For the RCU 1. Potentiometer (motor control) 2. Potentiometer (rudder control) 3. Switch (Led) 4. Lcd [display lat lon, speed in knot, potentiometer(motor control) percentage, rudder angle (based on potentiometer) and led status] Finding freelance who is advance i...

i have an arduino code that connects to ESP32 wifi and if no connection available switch connection mode to AP mode then user enter using internet browser from the device that connects to the device using AP mode to open the wifi configuration html page allowing the user to enter his/her wifi credentials to be saved and used by ESP , once done ESP will restart and switch back to wifi station mode and uses the saved credentials to connect , once connection established it should sends email using GMAIL with some details .. the issues i need help with : 1- once the device reaches the part where it should sends email it crashes 2- I need the wifi configuration page to be opened once user connects to the device AP automatically 3- the ESP code has another part where it communicates

We have 3 types of gas, each sign is 8.888 format with seven segment digits. we need an app which control an Arduino Mega and then 74HC4543 7seg drivers, and power interface. The app must allows to upload every gas price (4 digits) and send to Mega by WiFi. Hardware design is done and will be provided to awared freelancer

Hello, We have an existing Hardware and firmware that is currently working on a Raspberry Pi and an arduino. We have built our own PCB using ESP32, and we want to move the code into C to work on the new device. The modify inlcude the below: : Hardware needs simple modification. schmatic and pcb design.(refer to the attached file) Manager: Description: Serial communication with Arduino OTA (Over-The-Air Updates): Description: Implementing firmware updates over the air WIFI + BLE + Provisioning: Description: Integration of Wi-Fi, Bluetooth Low Energy (BLE), and provisioning functionality Communication Manager with AWS IoT + Cloud Watch: Description: Establishing communication with AWS IoT and integrating Cloud Watch for monitoring Securing the Firmware: Description: Ensuring

PID would be implemented on arduino with required conditions

...Optionally a Niles SI-1230 only has network control(we just need volume control for each zone) We may need to load different control data tables if another Amp. is removed or upgraded at a later date. At this point we have not purchased the larger 8 port USB to serial device, but we have tested the single port USB to serial connectors to issue commands with success. We can add hardware like an Arduino or network switch if the programmer has better control solutions. This would be okay if the speed is acceptable. We are happy to work with the coder and work out any bugs for testing. Using putty we can send the command to The Tascam Amp connected through the USB to com port adapter. Say COM4. send command PWR01 to the receiver. The receiver will turn on. The amp will sen...

I am looking for a skilled freelancer who can help me with my Arduino camera project. Project Requirements: - Use of a webcam as the camera type - connect with google lence

Hello! I'm looking for someone to help with a project monitoring weight and temperature (modbus rtu). The device used to monitor will be an Arduino, and the communication protocol required for MQTT is Ethernet. Data will need to be published to MQTT at a rate of every minute. Please let me know if you have experience with this type of project or have any questions. Thank you!

I am looking for a freelancer who can design an Arduino car dash. The dashboard should display the following information: Fuel, Oil pressure, Coolant temp, Trans temp, Volt, Block temp. Using 6x SSD1306 mono displays running the U8G2 library. 6 Displays wired through a TCA9548A multiplexer. Vehicle is a 12V system and all sensors run on resistance. These values will be supplied within a timely matter. If additional hardware is required, please specify. To run on a Arduino Mega. Displays are 128x64. The display will be split in half. Bar graph 30x126pixels (centered in display). Gauge name centered under bar graph 30pixel high. This is the same for all 6 screens. When button is pressed, screens will change from bar graph to digital (number) readouts in the centre of the t...

I need to drive 3 speed motor, plasmacluster, valve, read water inlet temperature and ambient temperature. It must work with RS485 modbus RTU protocol. It can work stand alone or with external modbus control. Development is with Arduino. source code must be released. Circuit and PCB diagram is indicative and must be completed by the freelancer. PCB is to be done with Eagle and must be released. A block diagram of both hardware and software must be presented in advance. Other technical specifications is "on the road"..

I am in need of a skilled freelancer who can help me with my ARDUINO IDE code problem for my SIM7600 GSM module. Currently, I am experiencing functionality issues with my code, and I have a list of specific requirements that I would like to be implemented. For this project, I need someone who is experienced with software integration for the SIM7600 GSM module. Some additional skills that would be preferred include: - Proficiency in ARDUINO IDE - Familiarity with GSM modules and communication protocols - Ability to troubleshoot and debug code efficiently If you are interested in this project, please provide examples of similar work you have done in the past. I am looking for someone who can work quickly and efficiently to help me resolve this issue. I always get the GPRS f...

Please Sign Up or Login to see details.

I am looking to hire a knowledgeable and experienced Arduino programmer who can modify an existing OBD library to be able to read odometer data for cars from 2015 and up. My project uses stn1110 () to connect to OBD and I am using an esp32 for running code. Library which I am work with and want to keep is I made a small change on it in order to be able to connect to stn1110 (it was designed to elm327). Basically I need a function which should return odometer in km for cars after 2015. Not sure if make any sense but I am interested for cars in europe (I saw on the internet that on US are some differences on some pids). Project is bigger than that and if this is ok

I am looking for a skilled freelancer to create a simple arduino PID program with the following requirements: Desired Output: - Control of current Input: - Voltage Timeline: - No time limit Ideal skills and experience: - Proficient in arduino programming - Knowledge of PID control theory - Experience with voltage/current control systems - Ability to troubleshoot and debug code efficiently Please provide examples of previous projects and relevant experience in your bid. Thank you!

A closed path is to be followed. For example, A White, Paint filled Shape :: Square , Rectangle or a Circle drawn on floor. All captured Images are to be stitched simultaneously to form a shape of path traced. Simple GUI with start , stop and a 2 picture boxes to display live Image and real time stitched Image of path . Any practical issues at the time of trials must be supported through Any desk or Team Viewer. Stitched Image to zoom in or out depending on number of pictures snapped. Any doubts, Please ask before bidding!!

More details: What is the goal of the project? Working on wifi with esp32 Do you have any specific requirements for the project? Yes, but they are flexible. The instructions are attached What is your preferred programming language for the ESP32 project? Arduino

Title: Arduino Program for Motor Control with Automatic Restart Purpose: - The Arduino program will control motors and automatically restart the circuit after a specific time. Components: - The program will need to control motors. Expertise: - Intermediate level of expertise is required for this project. Ideal skills and experience: - Proficiency in Arduino programming language - Experience in motor control - Knowledge of automatic circuit restart - Familiarity with electronic components and circuits.

I'm looking for an experienced engineer to design a schematic diagram for a custom Micro-controller based Electronic Monitoring unit for a 33KV Aegis Ring main unit. The purpose of the monitoring unit is to detect faults and monitor power. The microcontroller platform I prefer is Arduino, and the preferred communication method is RS485. The Engineer should have experience and expertise in high-voltage technology, electronic circuit design, and microcontroller programming. Power monitoring should be limited to the current display and fault detection limited to only signal obtainable from the marshaling box of the RMU

I am looking for a developer who can work on my project to develop functionalities for ESP32 through HTTP POST/GET requests. The project requires the use of Wi-Fi and Ethernet, and routines for Wi-Fi network auto-configuration. The timeframe for the completion of this project is a priority as I have a deadline. The level of complexity for the required functionality is advanced, so I...POST/GET requests. The project requires the use of Wi-Fi and Ethernet, and routines for Wi-Fi network auto-configuration. The timeframe for the completion of this project is a priority as I have a deadline. The level of complexity for the required functionality is advanced, so I am looking for a developer with experience in advanced programming. The ideal candidate should be comfortable working with Arduin...

I am looking for someone to design and provide both the wire diagram and coding for an Arduino board that has two 50kg pressure sensors (such as those used in weight scales), an MPU 6050, and a Bluetooth connection. The output should show the value of the weight being put on the pressure sensors and display the axes of the board using the MPU6050. The output will ideally look something like the attached where the blue rectangles are showing the angle of the board as it is moved, and the pressure sensors are each displaying their independent values. If this output can be done via the bluetooth connection to a phone, that would be great. If not, an output to the Arduino IDE is fine too. Either Arduino UNO or Nano are ok; whichever works better for the design. Design and ...

If you can speak Portuguese it is better for us to communicate. I want help with the programming logic of a microbit thread using RGB color sensors. I'm having a lot of trouble, because I don't know how to program and I need a program that calibrates the sensors and defines which colors it is seeing in JavaScript. I have examples of arduino calibrator programs, but I need one for microbit with yahboom extension board.

I am looking for a freelancer to help me create a University Parking Reservation Website for my existing Arduino Car Parking System. The website should have user registration and login capabilities, with the ability to process payments and provide real-time space availability updates. I would like the website design to be semi-customized, with the ability to add my own branding elements and customize the layout to fit my needs. Ideal skills and experience for this project include: - Proficiency in web development languages such as HTML, CSS, and JavaScript - Experience with payment processing integrations - Knowledge of Arduino and ability to integrate the parking system with the website - Ability to create a semi-customized website design that is user-friendly and visu...

Hello everyone, I’m using an open source simple webpage arduino project and I want to customize it a little bit as below: - Add another pin read in the table - Add Puissance calculation (simply from the results) - Add charts for the pins, puissance, and time - Add a way to log the values and download it as a file - Add an option to cut the electricity at a given puissance value All the options listed above are only code side, the core file is working great and contains description for each line of code, so I hope you follow the same method so I can understand what you do! Link: PS: It’s okay if you can only make part of the requirements, I’ll be happy to discuss with you!

Braille Keyboard Problem Description: - Visually impaired are used to Braille text - Typing is done differently, mostly with 8 buttons and control keys - There is no project using this kind of input standard - Other projects are mapping the 8-button input to ASCII - Implement the Braille HID report - Build a small device with the typical Braille input buttons and the ESP32 Proposed Components - Arduino Nano RP2040 Connect [Link] (contains ESP32) Or any other ESP32 board Braille keyboard

I am looking for an Arduino programmer who can help me with a project to code an Arduino board to control a circuit. Specifically, I need a programmer with experience in intermediate coding to create code that will allow a circuit to shut off at various times and then restart automatically. I do not have any existing code or hardware for this project. Therefore, the programmer will need to start from scratch to create code that meets my requirements.

We need to open a lock with a sta..."teach mode" button. After pressing the button, arduino is in the teach mode for 10 seconds and the user presses a button on the transmittor. After the 10 seconds, the arduiono stops the teach mode. During the teach mode, I want to flash a LED. In case of no power, the arduino should still know the signal from the transmitter. Maybe with a memory? Later on, if I press the teached button on the transmitter, the arduino needs to swich on a relay for 3 seconds but that's not a big thing :-) Radio distance: 10m One transmitter should open several linked arduinos at the same time. Task: - Find a transmitter on Amazon with 4 chanels - Tell me requested board, and reveiver module (original arduino) - Show me the ...

To develop firmware for ESP32S2 using Arduino IDE for the control of street lamp. The device will be connected to the internet via GPRS using SIM868. A front-end application will be used for lamp monitoring and control/updates.

We require a hardware circuit with its schematic diagram and arduino code which measures the water level using water flow sensor and solenoid. The circuit will be consist of an arduino UNO as a controller, 4digit seven segment display and rotary encoder for setting and displaying the value. The user will set the value accordingly accuracy: +98%

app with bluetooth connection to send commands to ESP32 arduino. I already have this app but APP now need to include another option. Explaning in better words. Existing app sends message to esp32 which configure a radio. this radio works in 2 modes. transceiver and receiver. App has been done to send commands as receiver. now we need to include Transceiver commands. thats it. you may add to existing app or make a new one from scratch, we will provide all information about commands of the radio

A system consisting of 8 exits connected to the LCD screen displays the condition of the exits. And the possibility of introducing the time of opening and closing through the buttons Arduino UNO will be used 8 relay module LCD Keypad Shield

I am looking for a talented person to do Arduino ( or any other device) project for controlling an addressable LED Strip.

Arduino PID Control for Current Output - Desired output to be controlled: Current - Target setpoint: Variable value over time - Ideal skills and experience: - Experience with Arduino and PID control systems - Knowledge of electrical engineering and circuit design - Ability to program in C/C++ - Specific deadline: No strict deadline, but would prefer a simple program completed within 1-2 weeks.

I have an active buzzer sensor. I need to attach this to my working arduino robotic car. I have an ultrasonic sensor as well. I want to program it in such a way that buzzer beeps as someone moves through ultrasonic proximity. Message if you can help.

Help Request: I am in need of assistance to create a simple app using App Inventor. The purpose of this app is to establish a connection with an Arduino board using the HC06 Bluetooth module. Here are the functionalities I would like to incorporate into the app: 1. Displaying received data: The app should have a screen where the currently received data can be shown. Additionally, I would like to have a button that, when pressed, displays the data being sent at that moment. 2. Data visualization: It would be ideal to visualize the received data in the form of a chart or graph, which can serve as a database. 3. Data storage options: As an alternative to the chart or graph display, I would like to have the option to send and save the received data in either an online Dropbox accou...

3- Project Outputs: a- The data will be saved to the computer in CSV file format. Each line in the file; time and the actual value (voltage or current) of the data read. b- A real-time graph will be drawn showing the time-dependent variation of the readings. c- The reading program will be saved as a separate program on the computer (it will not be run with the software of Arduino or similar hardware interfaces). Codes will be sent as installation file. d- If circuit preparation is required for the project, PCB and necessary connectors will be developed, printed and integrated into the system.

Create a bluetooth app that receives/sends data to Arduino (DFRobot Bluno Nano) - based sensors: pH, EC, Watter Pressure and RS232.

I am looking for a freelancer who has experience with programming Arduino boards to help me with my GPS tracking project. Specifically, I would like to implement real-time tracking using SIM 800L with Arduino nano. Ideal Skills and Experience: - Experience with programming Arduino boards - Knowledge of SIM 800L and Arduino nano - Familiarity with GPS tracking systems - Ability to implement real-time tracking features I already have all the necessary hardware components, so no additional components are required. I am looking for a freelancer who can help me with the programming side of things.

Interested in some design changes for the open source project 'trill bar' Looking to remove the onboard microprocessor and convert the trill bar to be a shield for an ESP32.

Hello I have an Arduino Circuit I need someone to do a peer review verify it is fine, Details would be given to chosen vendor.

...prototype development project. The intended use of the electronics is for a prototype. Hello Coders and Self Confessed Electronics Geeks! I need someone to help me design and then also make a working prototype PCB product using electronics. - You must know how to design and make a quality PCB. - Help generate parts list and assemble the PCB. - Must know how to assemble electronics. - Must know Arduino and its capabilities. I want to make a wireless Water level detector that is submerged in salt water. It checks water level every 30 mins, send signal wirelessly to reciever. If water low, it open a 12 volt solenoid #1 for 15 minutes. If water level too high is it open solenoid #2 for 15mins I need someone to help discuss how to do this and to also make the test unit. The...

...an amount to be dispensed from 50 to 2000 ml and also display a graphic of the tank with available volume. unit should be programed to dispense only when an "execute" button is pressed on screen, then the operator will press an analog button which will be mounted on the wand and should only dispense for a maximum of 30 seconds until an error " unable to dispense" message appears. I have an Arduino Uno r3 and a stone 7" touchscreen with an 8 zone relay for the pumps and solenoids Operator should be able to turn unit on, view tank levels, select item to be dispensed, set quantity, press "dispense", pick up the wand and aim and place it in the area to receive product, press the button on the wand and unit should engage the pump and solenoid un...

I am looking for an experienced electrical engineer who specializes in electronics to help me develop a hardware project. The project will focus on hardware development and will require the use of Arduino as the preferred platform. The ideal candidate should have experience in the following areas: - Hardware development using Arduino - Schematic and PCB design - Circuit analysis and simulation - Debugging and testing The main objective of the project is to design a circuit that will be used for a specific application. The circuit will require the use of various electronic components such as microcontrollers, sensors, and actuators. The candidate should be able to work independently and be able to complete the project within the given timeframe.

here is the project for someone who has really good experience in C++ and Arduino coding and knows working of google authenticator. project details would be shared to you, but i want someone experienced. share your cv or other workings as well, would be better for me to choose

I am looking for an experienced freelancer to help me develop an Arduino and Python-based predictive maintenance system for monitoring rotating assets. The ideal candidate will have expertise in both Arduino and Python, as well as experience in vibration analysis and predictive maintenance. Key Requirements: - Expertise in Arduino and Python - Experience in vibration analysis and predictive maintenance - Ability to develop a real-time (continuous monitoring) system - Familiarity with wired Modbus data communication The system will be designed to continuously monitor the rotating assets and detect any unusual vibration patterns that could indicate impending failure. The data will be collected in real-time using wired communication and analyzed using Python-based algor...

Please Sign Up or Login to see details.

I am looking for someone to help me connect a NEO6M and GY-271 to an Arduino UNO. I already have both of these modules in my possession, and I have a specific project in mind that I want to use them for. I have some experience with Arduino coding at the intermediate level, but I am open to suggestions for other applications. The only thing I need help with is the correct integration of the NEO6M and GY-271 and the Arduino. If you have the necessary skills to do this, then please contact me and let me know. Thank you!

app in android that can visually track any selected object/region with opencv (or other), communicate via bluetooth to arduino/servos to create a follow focus video

I'm looking for an experienced engineer to help me develop a project involving Arduino. My project will involve controlling DC motors wirelessly between an Arduino Nano and an Arduino Mega using the NRF protocol. The range of the wireless communication must be up to 50 meters. The ideal candidate should have in-depth knowledge of Arduino C++ code, and experience with developing wireless solutions. Experience programming servo motors or stepper motors is also preferable. If you think you have the right qualifications for this exciting project, let me know and let's get started building this ambitious solution.