3D Design Jobs

Please do not bid without reading the description and reviewing the images - thank you. I need a floor plan and a 3d elevation for a 550 sq ft accessory dwelling unit that will operate as a rental. The overall look must lean Traditional—pitched roof lines, balanced window placement and simple trim details rather than modern minimalism. Space planning is key. The footprint has to fit one comfortable bedroom, a full kitchen, living room, bathroom, a small dining area and a welcoming front porch within the 550 sq ft limit. Circulation should feel open, yet every inch must earn its keep so the unit remains attractive to long-term tenants. Deliverables I will review for approval • Scaled floor plan with clear dimensions, room labels and furniture placeholders for flow testing ...

Here is the checklist of tool changes gathered from your project notes. It breaks down the modifications by the specific component and outlines the exact order of operations the freelancer needs to follow to avoid throwing off the calibration scales. ### Loose Cannon Tool Revision Checklist #### 1. Main Square Modifications * **Mirror Markings:** Mirror all front-facing layout markings onto the back side of the tool for dual-sided use. * **Pivot Notches:** Resize the pivot notches to improve degree-tracking accuracy during mechanical movement. * **Branding:** Optimize the placement and clearance for the "Hidden Valley" branding engraving. #### 2. Slider Modifications * **Dado Slot Adjustment:** Modify the dado slot width and depth to provide proper clearance for the hardware...

I'm looking for a twist lock mechanism specifically designed for a hard cooler to be able to open and close with a 1/4 turn. One piece to remain attached to the cooler while the other will will be able to close and open a 3inch wide hole. The lock should be made of plastic and feature easy installation. Just need a 3d file to be able to print. Key Requirements: - Designed for hard coolers - Made from durable plastic - Easy installation is a must Ideal Skills and Experience: - Experience in designing locking mechanisms - Proficiency in working with plastic materials - Strong background in product design and engineering Please provide examples of similar work done.

I need an original, print-ready 3D model that I can drop straight into Bambu Studio and send to my P1S. The goal is a plastic pollen feeder for honey-bee colonies that keeps moisture out above all else. I am looking for functionality and quality design. I prefer that the designer consider print speed in the design. In this case, is it better to print the feet to snap on, or to print them as part of the product, since that may require supports? If you can find a way to incorporate any part of my logo, that is good, but not required. Even just the bees. Core elements I have in mind • Pull-out pollen tray that runs on a smooth sliding track—no snaps or magnets. • Roof overhang long enough to shed rain away from the tray gap and any seams. • Back pane...

I already have the raw 3D outputs; what I need now is the polish that will push them into true photo-realism. All scenes are indoor, and the brief is straightforward: elevate the lighting and surface detail until each shot could pass for an architectural photograph. You’ll receive high-resolution base renders (multi-pass EXR/PNG). Using Photoshop, Lightroom, or your preferred compositing tools, refine every frame so materials read believably, light feels natural and balanced, and subtle post effects bring depth without over-stylising. Key points to emphasise • Lighting • Textures Please return layered PSDs plus flattened TIFF/PNG versions at original resolution. If something in the current passes limits realism, flag it early so I can request a re-render. Looking f...

I'm looking for a talented designer to create realistic material illusion designs for a print-on-demand company. The designs should mimic the appearance of various materials on a printed 3-d surface. Key Requirements: - Designs should realistically mimic: - Metal - Wood - Fabric - Plants - Smoke - Style must be realistic Ideal Skills and Experience: - Strong portfolio in realistic design - Proficiency in design software (e.g., Adobe Photoshop, Illustrator) - Experience with print-on-demand products - Attention to detail and creativity Please provide samples of similar work.

Urgent: Luxury Event Scenic Design – 3D Redraw + Shop Drawings + Renders Project Description: We need an experienced 3D designer/draughtsman for high-end luxury event scenic work for bespoke installations in South Africa. Scope (one fixed-price project): Convert our concept images into dimensionally accurate layouts/plans Detailed element drawings (bespoke stage sets and custom scenic installations) Clean high-quality shaded/illustrative 3D renders Build-ready shop drawings: scaled plans, elevations, general assembly views + material specifications Deliverables: Three main scenic layouts with associated custom elements, each including render + build drawings + minimum 2 revision rounds. Project Deadline: 20 June 2026 Requirements: 5+ years technical drawing +...

I need a talented 3D designer to create detailed front and side views of a traditional-style residential building. Requirements: - Accurate 3D modeling - Traditional architectural elements - High-quality renderings - Experience with residential projects Ideal Skills: - Proficiency in 3D design software (e.g., SketchUp, AutoCAD, Revit) - Strong understanding of traditional design principles - Attention to detail - Previous portfolio of similar work Please provide samples of your work and a rough timeline for completion.

I have a flat technology-sector logo that I will send you as a high-resolution JPG. I need that 2D artwork rebuilt as a clean, dimensionally accurate 3D model in AutoCAD (or any CAD package that lets you export the required formats). The end goal is product branding, so the model has to be production-ready—no stray faces, non-manifold edges, or reversed normals. Once the geometry matches the original artwork, please export and hand over every file listed below along with a quick transparent render so my marketing team can preview the depth and lighting. Required deliverables • STL • STP (STEP) • DXF • IGS (IGES) • X_T (Parasolid) • PNG render on transparent background I’ll review the model by opening it in Inventor and SolidWorks, ...

Project Overview: I am looking for an experienced Injection Mold Designer to create a complete, production-ready mold design for a 3-inch plastic Vernier Caliper. I own a CNC workshop and will be manufacturing/cutting the mold cavities myself on our CNC machines. Scope of Work & Deliverables: Complete Mold Design: Core and Cavity design based on the dimensions of a standard 3" plastic Vernier Caliper. Component Parts: The mold should include all necessary components (slider mechanisms if needed, ejector pins, cooling channels, runner, and gating system). CNC-Ready Files: Fully optimized 3D CAD models. Deliverables must include STEP/IGS files for CNC machining, as well as native CAD files (SolidWorks). 2D Technical Drawings: Clear 2D blueprints with tolerances and dimensions f...

We require optimisation and redesign of our tractor loader structure to achieve reduced weight and lower manufacturing cost while maintaining full steel construction and existing structural performance standards. Preferred Freelancer Locations: We are specifically seeking engineering talent located in major manufacturing hubs, including the USA, UK, France, Italy, Spain, Poland, Germany, Russia, Japan, or South Korea. Using the photos, field notes, and hand measurements provided by us, the engineer/designer should develop an accurate fully-parametric 3D AutoCAD model along with production-ready 2D fabrication drawings compatible with AutoCAD 2023. The optimisation process should include frame geometry refinement, material efficiency analysis, and detailed FEA validation to ensure all cri...

I'm looking for a skilled designer to create a strain relief for an overmolded power cable. The strain relief will be used indoors and needs to be in a custom shape. Requirements: - Design a strain relief that accommodates a power cable - Suitable for indoor use - Custom shape as per requirements Ideal Skills and Experience: - Proficiency in CAD software for designing custom shapes - Experience with strain reliefs and overmolded cables - Knowledge of materials suitable for indoor use Please provide samples of similar work and a brief approach to the project.

I need an experienced AutoCAD architect to take a company project from the very first concept sketch all the way through permit-ready construction documents. The scope covers every phase—concept development, detailed design, and final drawings—so I can move straight into bidding and construction without passing the file to another team. The brief is deliberately flexible on style. Whether the solution leans modern, classical, industrial, or blends several influences is up to you; what matters is a coherent, buildable design that meets functional requirements and showcases strong spatial thinking. To keep expectations clear, here are the tangible deliverables I will be reviewing: All work must be produced in AutoCAD, screen recorded using our app. Periodic check-ins via scre...

We are developing a stylized pirate game called Royal Pirates and are looking for a freelance 3D artist who can create modern, stylized 3D game assets based on references and concept images. The game has a colorful pirate theme with ships, islands, tropical environments, funny details and clean stylized visuals. We need someone who can help us create multiple game assets over time. Possible tasks include creating: 1. Stylized pirate ships 2. Small tropical islands 3. Pirate buildings and huts 4. Wooden docks, bridges and platforms 5. Palm trees, rocks, barrels, crates and decoration props 6. Simple funny pirate themed characters or mascots 7. Other game ready assets based on our references We are looking for someone who can turn 2D references into clean and usable 3D models. You may use...

I am developing a line of custom 3-D-printed chains, each featuring a large, modern-and-sleek pendant intended strictly for decorative use. Before I reveal the concept sketches, dimensions, or branding details, I’ll need the awarded freelancer to sign both a standard NDA and a non-compete agreement; once that paperwork is in place I can share the full brief. The core task is to translate my rough hand sketches and reference photos into precise, production-ready CAD. I’ll rely on you to model every chain link for reliable printability, integrate the pendant so it hangs naturally, and generate clear 2-D drawings that call out critical tolerances. Preferred file formats are STEP for further editing and STL for direct printing, but let me know if you also work in Fusion 360, Solid...

I have sketches for two separate manifolds that now need to be rebuilt as clean 3D models. The task is strictly about the manifold bodies;, I will supply our existing press-fitting 3D files so you can verify interface geometry without modelling those parts again. Key points to observe while modelling: • Overall length and width must remain exactly as shown in the sketches. • All connection diameters are critical and must match the values provided. Once each manifold is complete, export it to STEP so I can drop the files straight into our CAM workflow. If you build the parts in SolidWorks, Fusion 360 or a similar parametric package, feel free to send the native files as well, but the only mandatory deliverable is the pair of STEP files. Before final release I’ll che...

Product 1: Programmable Board Enclosure (DIY Robotics MCU) • Purpose and audience: Enclosure for a student-friendly robotics microcontroller (Classes 6–12); modern, approachable, robotics-themed—avoid plain rectangular “electronics box” look. • Ports and alignment: - Slide switch and USB Type‑C are on the bottom side of the PCB (ignore incorrect top-side switch in STEP). Both must be on the same side and same level on the enclosure for easy access. - Provide a cutout for a 4‑pin JST connector (component missing in STEP but mounting holes exist). - Provide a cutout for a female DC barrel jack on the right side of the bottom enclosure part (charging port). • Industrial design style: - Rounded edges, smooth corners, compact, slightly futuristic, ...

More details: Is this project for business or personal use? Personal What information should successful freelancers include in their application? Experience How soon do you need your project completed? ASAP

I need a detailed 3D model of a tapered 5G transmission tower truss in Autodesk Inventor that has to fit these requirements of 50m tall the tower footprint must be contained within 10m x 10m including any guy-wires or bracing , the solution must include a factor of safety of 4 . The model should include: - Exact measurements and dimensions - Material specifications - Joint and connection details Additionally, perform static stress analysis on the model including wind forces from Brisbane Australia . The truss will be made of galvanized steel. Ideal skills and experience: - Proficiency in Autodesk Inventor - Experience with 3D modeling and stress analysis - Knowledge of galvanized steel properties and structural integrity

I would like three complete garments built in CLO 3D from my own sketches and patterns. The capsule includes one shirt/top and two coordinated bottom pieces (pants or skirts) that I will specify once we start. I will provide vector flats, reference photos, and the pattern files so you can focus entirely on the digital construction, fabric physics, and clean topology. Key points you should know: • Fabric look-and-feel must match organza for the top section and cotton for the bottoms. Please set up realistic textures, thickness, and physical properties so I can review drape and fit. • All pattern pieces should remain editable; do not collapse them into meshes. • Consistent avatar size is essential so I can mix and match the garments later. Deliverables • Three se...

i want someone who could help me with some work in rhino in the next 1-2 hours

I’m refreshing the main entrance of a new commercial tower and want a clean, contemporary look that immediately signals professionalism. The overall aesthetic must be modern, built around a calm, neutral palette—think soft greys, warm whites and muted stone tones—so the space feels bright yet timeless. Key elements to integrate • A streamlined reception desk that becomes the visual anchor as soon as visitors walk in • A comfortable seating area that encourages short, informal meetings without cluttering circulation paths • Decorative feature lighting that doubles as artwork, creating a memorable first impression after dark I’m after a fully developed concept, not just sketches. Please include: • Mood board illustrating materials, finishe...

Please Sign Up or Login to see details.

I have a commercial space and the goal is to present a fully developed modern interior concept through both high-quality still images and a smooth video walkthrough. The base CAD drawings are ready, and I typically work in SketchUp, 3ds Max and V-Ray, so please stay within that toolchain for consistency. What I expect from you • Photorealistic still renders that clearly show materials, lighting and furniture layout • A 60–90 second video fly-through that matches the still-frame quality • Native project files (SketchUp/3ds Max) with linked V-Ray materials and textures for future edits For your proposal, focus on the concept you would bring to the space, how you plan to tackle modelling, texturing, lighting and post-production, and the timeline you need to delive...

I'm seeking a skilled artisan to create custom acrylic chocolate moulds featuring wild animal shapes. Requirements: - Create moulds based on animal negatives - Precision and attention to detail are crucial - Experience with acrylic and chocolate mould design - Ability to bring unique designs to life Ideal Skills: - Custom design expertise - Familiarity with wild animal shapes - Proficiency in working with acrylic materials Please provide samples of previous work and any relevant experience. We can supply 2D drawings of the animals and other items. These are to be cut out of 15mm thick acrylic sheet

I have a reference image that I need converted into a clean DXF ready for laser cutting a decorative metal piece. Because the artwork will be cut from sheet metal, low detail is preferred—bold, simple contours with no unnecessary nodes or hairline elements that could weaken the final cut. Please trace or redraw the image into vectors, set all lines to a single closed path where appropriate, and keep everything on one layer so my laser software reads it without rework. I’ll supply the image and the finished part dimensions once we start; you return a DXF that opens flawlessly in AutoCAD and LightBurn. Deliverable: • One DXF file at the correct scale, with line geometry optimized for metal cutting. If you have questions about kerf allowance or minimum bridge widths, let m...

I’m commissioning a Unity scene that will be used in a one-off art exhibition. It will need to run smoothly on the Meta Quest 3, using mobile URP. The environment starts inside a cathedral, which leads to a labyrinth. The cathedral is ideally loosely based on Chartres cathedral, but does not have to contain too much detail. There should be a stone detail of the overview of the labyrinth of the floor of the cathedral. Past this there will be an entrance to the labyrinth, which should follow the layout of the labyrinth overview. Ideally the inside of the labyrinth will feature varied tunnel environments, such as a mix of straight arched corridors, stone tunnels, and catacombs for example. Art style is realistic, but needs to be optimized to run well on the Quest 3. Tunnels should fee...

AI Video Creator & 3D Animator Needed – Ongoing Potential We are looking for a skilled AI video creator and 3D animator to work on a new animated content project. This is not standard video editing or flat 2D animation — we are using AI tools combined with 3D techniques. The style we are developing is fully 3D rendered, with a unique textured/material finish — characters have detailed surfaces where you can clearly see the texture and pattern (similar to felt or fabric), giving a rich, tactile look — nothing flat or cartoon‑like in the way traditional 2D shows are. We have a clear format and style guide, and we will provide a full list of requirements, instructions and references so you know exactly what to build. You will simply follow our brief and speci...

I’m putting together an educational package on human neuro-anatomy and I need a clean, OBJ-format brain that presents the white matter and grey matter as two clearly separable meshes. Scope • Purpose: the model will be shown in lectures and short videos, so it must look accurate at a classroom zoom level but does not need every microscopic sulcus. Think moderate resolution: all lobes, cerebellum, corpus callosum and brain stem should be recognisable, yet the poly-count should stay friendly for smooth orbiting in common viewers such as Blender or Sketchfab. • Static only: no scripts or embedded interactivity—just the geometry (and optional textures) ready to import. • Deliverable: one OBJ (or two OBJs if you prefer to separate layers), accompanying MTL, a...

I have sketched out a covered storage rack that will protect several water-craft on my property, and I now need a SketchUp specialist to turn the concept into fully buildable construction documents. Core brief • Footprint: roughly 8 ft deep × 15 ft wide × 8 ft tall (walkunder hight about 6-6.5 ft) • Layout: open side entry, no perimeter walls • Structure: pressure-treated 4 × 4 posts on deck blocks at the four corners and beneath the central beam and roof to be peaked with lightweight rafters supporting corrugated metal/plastic panels • Central beam: 2 × 6 running the full 15 ft span; rack arms will bolt to posts supporting this beam • Remaining framing: 2 × 4 framing members; 1 × 6 boards on ends to provide partial pivac...

I'm creating a 4ft samurai-style sword for our pilot film. The blade should be made of plaster, and the hilt should feature intricate engravings. Key Requirements: - Design a medieval/fantasy/samurai-style sword - 4ft in length - Blade made of plaster - Intricate engravings on hilt Ideal Skills: - Experience in weapon design - Proficiency in sculpting or working with plaster - Attention to detail for engravings - Background in prop design for films

I have an existing memorial-style plaque; I now need a clean round of edits applied to the file. The plaque should be resized so that the longest side is increased to 300 mm, and the ground-spike/leg length extended to 300 mm so the proportions stay balanced. Graphical additions • A relief cemetery logo goes in the upper-left corner. • The person’s full name sits dead-center, followed by birth and death dates directly beneath it. I’m flexible on typography—any tasteful, legible font that complements the plaque’s classic look is fine. • A QR code needs to be centred at the bottom edge. (QR code is only for visual purposes for now and does not need to link anywhere) Everything has to stay perfectly aligned and maintain the existing memorial aesth...

I need accurate CAD designs that include roofline projections, elevations, and floor plans. I will provide detailed sketches and drawings as references, available in digital formats such as PDFs, DWG, or DXF. The task involves translating these references into precise and professional CAD files. Let me know if additional clarity or adjustments are needed as you work through the designs.

Hello, I’m creating a virtual social temple/club experience called DiscoMagik inside Roblox Studio. I’m looking for a builder / environment artist who can create an immersive audiovisual world with a: * mystical * futuristic * electronic rave * sacred geometry * astral / cyberpunk temple aesthetic IMPORTANT: This space is intended for LIVE DJ events and real-time audiovisual streaming. The temple should be designed to: * support live streaming integration from OBS * play live DJ audio coming from an external mixer * display live visuals/video streams on in-world screens * function as a social virtual club for multiple users * include atmospheric lighting, particles and FX * have a dance floor, chill zones and a main DJ stage * be optimized for desktop and mobile users The...

I have a set of detailed plans for the back of a residential property and need that single façade reproduced in Chief Architect. The goal is a photorealistic rendering—accurate textures, realistic lighting, and true-to-plan proportions—so the image can be shared with clients for final design approval. You will receive the existing drawings in digital format. From those, please build the model (or import, if you prefer) in Chief Architect and deliver a high-resolution still image. A short walkthrough clip would be a welcome bonus, but the core deliverable is the finished photorealistic shot of the rear elevation. Because only the back of the house is required, focus all detailing—materials, fenestration, landscaping touches, and shadows—on that view. I&rsquo...

I'm looking for a skilled 3D designer to create a dental veneers container palette with a cover. The design should be modern and sleek, and the container should simulate clear plastic. The cover should be perforated to facilitate washing of the veneers. Key Requirements: - 3D design of a dental veneers container - Modern and sleek styling - Simulates clear plastic material - Cover designed with perforations for washing Ideal Skills and Experience: - Proficiency in 3D modeling software (e.g., SolidWorks, Blender) - Experience with product design, especially in the dental or medical field - Strong understanding of modern design aesthetics - Attention to detail and functionality

A brief reveal clip that introduces the new brand logo. Think 6–10 seconds, optimised for LinkedIn and X. A simple motion graphic or subtle 3-D build as long as the animation reinforces a transition. 3 brand colours + fonts and logo will be shared. Please deliver: • Editable vector logo (AI/SVG) plus PNGs and a PDF style sheet • MP4 and source file for the launch clip (After Effects, Blender or similar) • A quick hand-off note outlining font names and any sound or plugin use I’ll give you our current brand guidelines and the new tagline the moment we start so you can align spacing, kerning and pacing. Looking forward to seeing a sleek concept that makes this rebrand feel fresh the instant it appears on screen.

I’m looking for someone with an eye for camera angles and composition to act as a virtual location scout for a book project. I have detailed descriptions of various scenes, and I need someone to find matching 3D environments, get my approval on them, and then capture exactly 30 high-quality screenshots from specific perspectives. How the workflow will work: I will give you a scene description (like a futuristic city or a fantasy tavern). You will find 2 or 3 free 3D assets or environments online (using platforms like Sketchfab, Blender, or other free repositories) and send them to me. Once I pick the one that fits my vision, you will set up the camera angles based on my directions and take the screenshots. Most of the shots will be at eye level or slightly above eye level. To sh...

I already have a rough SketchUp draft and reference images for an entrance lobby and adjoining basin area that includes a washing-machine nook. Your task is to take that draft, polish the geometry, apply a refined classical style, light the scene realistically, and deliver finished, photo-quality renders—all today. The look I’m after is unmistakably Classical: think balanced proportions, subtle ornamentation, and a soft, elegant palette rather than anything overly ornate. Please keep materials, mouldings, and fixtures consistent with this direction while remaining faithful to the dimensions in the draft file. Timing is critical. I’ll hand over the SketchUp file and reference folder as soon as we start; you return updated SketchUp model plus two high-resolution JPEG or P...

I need a rear seatpost mount for a Lezyne radar. Requirements: - Material: Plastic - Attachment: Screw-on Ideal Skills and Experience: - Experience with bike mounts - Proficiency in working with plastic - Design for durability and stability

I have three straightforward mechanical part drawings in DWG format that Protolabs cannot accept. I need each one converted to a clean, watertight STP model that will upload without errors. While you’re converting, please add any missing overall and critical feature dimensions as well as the material specifications shown on the title block; these details must carry through so the quote Protolabs generates reflects the correct machining requirements. The parts follow normal industry‐standard tolerances, so note the general tolerance block (ISO 2768–mK) in the STEP metadata or on an attached annotation view. Deliverables • One STP file per part, ready for direct upload to Protolabs • A quick visual PDF or screenshot of each model showing the added dimensions and...

I'm seeking a talented interior designer to create a modern dining area for my pizza restaurant. The design should be inviting, stylish, and reflective of contemporary dining trends. Key Requirements: - Design a modern, inviting dining area. - Create a layout that maximizes space and enhances customer flow. - Select color schemes, materials, and furnishings. - Incorporate branding elements into the design. - Collaborate on any necessary adjustments based on budget and feasibility. Ideal Skills and Experience: - Proven interior design experience, particularly in dining establishments. - Strong portfolio showcasing modern design projects. - Excellent spatial awareness and creativity. - Ability to work within a specified budget. Please provide a portfolio with your bids.

I need a detailed 3D render that shows my wearable medical device on an adult male model so I can present the concept in a presentation. You will work from a reference photo I already have, but many points must be refined once I describe the difference in device. The scene should feel clinical yet approachable, with lighting that highlights the device rather than the model’s features. Please deliver: • The editable source file (Blender, Cinema 4D, or similar) with organized layers

Create a video orbiting around + zooming in on an object I scanned using an app called Polycam on my iphone. I have exported a .usdz file of the object I scanned but I can see from the app I can export in various other formats if I subscribe to the app again. The formats are Mesh (OBJ, GLTF, FBX, DAE, STL, USDZ), Point Cloud (PLY, LAS, GEO Reference LAS, PTS, XYZ, DXF) and Blueprint. The scanned object is a historical cylinder shape artifact made of stone that was once a burial urn. It has a bas-relief on it shaped like a man. It can be seen better when the material is changed from the original stone. So, what I need is that the material of the scan is changed so that it appears clay type. Then I need a video in possibly 4k or 1080 smoothly orbiting around the cylinder shape urn lowering ...

I need a virtual animated prototype model for a healthcare product, primarily for product demonstration. The prototype should focus on: - Functionality and usage - Design and appearance Ideal skills and experience: - 3D modeling and animation - Experience in healthcare product visualization - Strong understanding of product functionality - Attention to detail in design accuracy Looking for a freelancer who can create an engaging and informative animation that highlights both how the product works and its visual design. Project container is approximately 14 inches by 14 inches by three and a half inches and can contains approximately 8 different containments compartments. It will also contain liquids in certain compartments that need to be separated from electronic parts wires and other...

I’m commissioning an early-stage architectural depiction for a modern, tunnel-style Vehicle Evaluation Station that doubles as a towering billboard. The structure will sit beside other drive-through services—think international fast-food lanes and car-washes—so it has to catch a driver’s eye the moment they turn in, broadcast brand identity from every angle, and guide them smoothly through an automated scan. Core experience I need shown: • Driver registers at a touch-screen kiosk, enters the tunnel, and keeps rolling while integrated cameras, LIDAR and lighting scan and photograph the entire vehicle, capture plates, and document overall body condition. • As the customer exits, the system instantly pushes an evaluation, value and purchase offer to their ...

I need a 3D modeler to create assets for an animation/film project. The focus is on object animation. Key requirements: - Create 3D models for animation use - Medium detail level, moderate complexity - Experience in object animation Ideal skills: - Proficiency in 3D modeling software (e.g., Blender, Maya) - Strong understanding of animation principles - Attention to detail and creativity Please share relevant portfolios.

Job Description: I am looking for an experienced 3D modeler/draftsman to convert an existing, authentic 2D architectural blueprint (see attached image) into an accurate 3D model. The provided image contains all the necessary details, including floor plans, elevations (front, back, and side views), and a cross-section of the house.

I need an experienced stamping-die specialist to turn my product data into a clear, shop-ready concept package. The immediate focus is the 2D drawing and layout stage—strip layout, station breakdown, blank size, and press-tonnage check—so I can lock the process before investing in a full 3D design. You’ll get the part model (STEP), press specifications, and production volumes. From there, please deliver: • A fully-dimensioned 2D strip and overall layout (DWG/DXF and PDF) • Key sectional views that explain lifters, cams, pilots, etc. • A brief utilisation and tonnage summary No complete 3D solid is needed yet; speed and clarity at concept level are the priorities. Practical shop-floor insight is essential—I want potential interferences or formin...

I need a skilled professional to create CAD designs for architectural plans of residential buildings. Requirements: - Proficiency in CAD software - Experience with architectural designs, specifically for residential buildings - Ability to deliver accurate and detailed architectural plans Ideal Skills: - CAD design expertise - Architectural knowledge, especially in residential layouts - Attention to detail and precision Please provide samples of previous work. Looking forward to your bids!