Embedded Software Jobs

I need an Embedded Software developer for my project that involves data collection and transmission using the LoRaWAN communication protocol. The ideal candidate should have experience and knowledge in: - Embedded Software development for STM32 microcontrollers - LoRaWAN protocol implementation - Acconeer A121 sensor integration and control in measuring liquids from industrial containers - BLE protocol expertise and experience - MQTT Data transmission (using Cayenne) - Integration with ThingsBoard The primary function of the software is data collection and transmission, and the communication protocol priority is LoRaWAN. Additionally, the software should have the capability of monitoring battery levels. The ideal candidate should have experience in developing low power consumption softwa...

I am looking for a freelancer to assist with the development of a personal scale using Nordic Semiconductors nRF21540-DK and HX711 amplifier, along with 4 load sensors. The project will require software development on the nRF Connect SDK version 2.3.0. Ideal skills and experience for this job include: - Proficiency in software development using Nordic Semiconductors nRF21540-DK and HX711 amplifier - Experience with load sensors and their integration with hardware and software - Familiarity with nRF Connect SDK version 2.3.0 - Attention to detail and ability to troubleshoot and solve problems I'm using this github page as a reference and I've done what it says but nothing works. The intended application of the scale is personal, and I am only in need of software development a...

We are asking for firmware development on Decawave (Qorvo) 1001C module for distance measurement. There will be two components: Receiver (Stationary) and Tag (Mobile) -Receiver will be act as a stationary, mains powered logic controller to set output as 1 or 0 depending on the distance measured of tag or tags around. -Tags will be moving and battery powered devices -Tags will be acting depending on the movement, so it will include integrated accelerometer -Tags will work on 400mAh rechargeable battery target at least 1-week battery life -Receivers will be configurable to set distance threshold (via BLE) We need a work for the algorithm, working principal and firmware codes for communication between tags and receivers. Tags should be low power since they will have a rechargeable batteries ...

We are searching for an embedded SW developer, with knowledge of ARM architectures, AMBA bus. SoC like Xilinx Zynq, FPGA+ARM, soft processor are required. C/C++ for embedded systems. The company is searching for long term collaboration

HI I have a nodes using MESH protocol. device is nRF52840 using SDK 17.0.1/ Mesh 5.0.0 I have a firmware it has a model. the Nodes send temperature, rpm, and other variables. in the same firmware if we setting the device as "subscription" the device will receive the data from the other nodes, and print the data recived in the screen using RTT protocol. what i NEED? 1.- the device setted as subscription, i need to implement serial comunication (now is printed using RTT) 2.- I need the subscription device, sends some data to especific node un the mesh For example if receive 00AF-50 the node will send code 50 to node 00AF thanks. Ricardo

I need firmware development for ESP32-C3 for following tasks: -Ultra low power consumption design -Run on 2xAA batteries for more than a year -On-board Digital Temperature Sensor value reading and logging (logging period) -Sending to an MQTT broker (upload period) -Wait for commands from server after data upload -Wi-Fi parameter (SSID, passwd) set over BLE for lower power consumption -Data encryption -no webpage hosting or accesspoint mode needed Those are the main functions of the device. We need an experience for low power programming, we are able to design the circuit.

Hello I need an expert in Embedded engineering. Please apply if you have the required expertise. No teams or companies please.

We are looking for an embedded software developer who can develop FreeRTOS software in the Telemetry card project that we will develop with ESP32. General Qualifications - Developing FreeRTOS projects with ESP - Able to remotely update ESP software - It will communicate with the server via socket connection with MQTT - It will communicate via UART - Provide internet access with GSM Module - Able to communicate with MDB protocol There are ESP32, Quectel EC200 GSM Modules in the project. It communicates with ESP32 and Quectel GSM module via UART. It will also communicate with Vending Machine and Payment Devices with two UARTs. The software on the ESP will be updatable from remote servers. It will communicate with the servers over Socket with MQTT protocol. We are dealing with applications ...

I'm looking to hire a freelancer to help me develop a multiple servo DC encoder motor control system that can operate within a low speed range of 0-60 RPM. Specifically, the motor control system will be used in the vehicle control domain. The system will require position control feedback in order to ensure precise measurements. If you have experience developing these types of systems and can provide references, please reach out! I'm excited to find the perfect candidate for this project.

Hello I need an expert in Embedded engineering. Please apply if you have the required expertise. No teams or companies please.