What to opt - AutoCAD, Revit or Staad Pro? This article lays out which tool is necessary for your career and why.
I am working on a project including sisal fibre in concrete in order to improve it. So my plan is to use a previous experiment (Uploaded in this) use a similar beam with a content of 0.3% of sisal fibre and try it on ANSYS and check if we get similar results as the experiment and then take the study further by trying how would the beam react under dynamic condition. I really also want to go through the process so and need an explanation for the process.
We are looking for Civil Engineers who are willing to write content for our website http://CivilEngineeringBible.com. We need articles and/or courses that are not yet covered on the website. This is an ongoing project and we will pay per article/course.
I need someone who is familiar with international building codes and be able to provide a code analysis of whether my project will need an automatic fire sprinkler. I own a multi-family dwellings (2.5 floors), which I am working to pull a permit to convert the first floor into a pizza shop. I have a licensed architect working on the plan, but he is not expert in fire sprinkler requirement. So I need someone to do a code analysis to see whether an automatic fire sprinkler system is required for my project
20squ Outbulding, 3m extension and loft conversion structural calculations and drawing needed
We need to hire a designer for doing structural design for fan support 2 cases attached : 1-Loading plan for the grating 2- hand sketch for the proposed fixation the structural design must be in order to be submitted to consultant approval [url removed, login to view] a sketch for the needed hatch in CAD format [url removed, login to view] paper showing the design criteria and the material grade used 3. structural calculation for the steel item using a known program 4. design for the connection of anchor to concert using Hilti software bolts if any (HST preferred ) 5. design for bolted connection [url removed, login to view] of welding connection note that : all seismic loads and wind load if any must be put in consideration Download link [url removed, login to view]
We need to hire a designer for doing structural design for checker plate : attached : 1-approved design 2- hand sketch for the proposed grating fixation the structural design must be in order to be submitted to consultant approval [url removed, login to view] a sketch for the needed hatch in CAD format [url removed, login to view] paper showing the design criteria and the material grade used 3. structural calculation for the steel item using a known program 4. design for the connection of anchor to concert using Hilti software bolts if any (HST preferred ) 5. design for bolted connection [url removed, login to view] of welding connection note that : all seismic loads and wind load if any must be put in consideration Download link [url removed, login to view]
I need a solution (with working) of the minimum vertical force a 3 centred arch structure can withstand before collapsing. No programming is required. Please post me your fee rates and I will send you the details of the problem. Thanks.
• Develop and elaborate soil and groundwater research projects and necessary remediation at company facilities and legacy sites. • Geotechnical, geological and borehole profiles with longitudinal sections of alignment. • Elaborate Tender Design, Preliminary Design and Detailed Design structural drawings. • Develop of detailed drawings on the groundwater flow and georeferenced projects.
RCC Building Structural Analysis and Design in [url removed, login to view] as per IS Standard
We are a wellfounded company specializing in steel footings and foundations for the professional and private markets. We a looking for a Structural Engineer for an ongoing partnership. Initially we need someone who has in depth knowledge of NCC compliance and AU Standards in regards to footings for ligther backyard building products like deck, pergolas, sheds, cabins etc. Further ahead we are looking to enter the professional market within the Railroad and Freeway industry for which we have extensive experience in other regions. We need an engineer who can: - support us on NCC requirements for footings (urgently deck footing requirements) - support us in certification of our steel footings for the private sector - advice us on soil type requirements - clarify our options on the market in our current situation Must be able to start immediately. Will need time estimates for various tasks and hourly rate.
Its engineering job for a utility project which involves related civil design/engineering activities i.e drawings, calculation, foundation , interfacings, BOM etc.
Four Concrete beams internally reinforced with different materials such as Steel, Basalt Fibre Reinforced Polymer (BFRP) under known loads Need to be simulated and analysed in ANSYS. This is a FEA modelling project and requires experts in areas of structural design, ANSYS finite element analysis.
A client in Aberdeen plans to utilise an open area of 50m by 70m to construct a multi-storey building for his business development with a service area of 17,500m2. The distance between any two columns is requested to be from 5.0m and 8.0m. The height of each storey is 3.5m. The characteristic variable action on the building floor and the roof qk =2.0 (kN/m2) and 0.75(kN/m2), respectively. It is assumed that designs of stair and foundation have been excluded in your design. The client would like you to provide two solutions for this new building with the same structural grid for comparison. One is steel-concrete composite floor which is supported by composite beam and steel column. Another is in-situ-casting concrete floor supported by concrete beam and column. All the steel beams and steel columns are in S275 and UKB and UKC sections, respectively. Steel deck sheet for steel-concrete composite floor adopts the ComFlor from Tata Steel. The materials and further design information of the reinforced concrete slab, beam and column follow below: • Concrete grade 35 (fck=35 N/mm2) • Maximum aggregate size =20 mm • Main steel reinforcement - high yield steel (fyk=500 N/mm2) • Transverse links - high yield steel (fwyk=500 N/mm2) • Diameter of main longitudinal steel (ds) = 25mm • Diameter of transverse link (dl) = 10mm • Design tensile strength (fctm) = 3.5 N/mm2 • Assume 15% moment redistribution (i.e. d = 0.85). • Architectural requirements limit the maximum overall beam depth to 800mm • Concrete cover to the main reinforcement (XO, XC1) = 25mm • Unit weight of concrete = 25 kN/m3 As a structural engineer, you have been asked to carry out the structural analysis, design and detailing of this multi-storey building with the main tasks listed below: Q1. Introduction to the problem, conceptual design of the structures and estimation of member sizes for two solutions, respectively. Q2. Carry out load calculations, including wind load, and perform stability design of your two solutions. Q3. Carry out structural analysis using LUSAS software to determine the effects of actions on one typical frame consisting of beams and columns Q4. Perform manual analysis to verify the above LUSAS results. Q5. Design continuous concrete beam. Q6. Design concrete column Q7. Design steel-concrete composite slab Q8. Design steel-concrete composite beam.
I need certain items quantity take off ( 30 line items ) for concrete and structural steel related work. I will provide the drawings and item list . I can even provide a sample estimate to give an idea. I need precise number I already have my own numbers so this will be trial. I DO NOT HAVE TIME SMALL WORK NEEDS TO GET DONE IN ONE DAY !