CNC 3 axis + CNC software

Closed Posted 2 years ago Paid on delivery
Closed Paid on delivery

We hire, for CNC machine design (3 motors): 3D mechanical designer, open source software programmer and mechanical engineer for machining.

The CNC needs to have a horizontal table (x axis) that is raised / lowered with a precision of 0.1 mm (by the y axis), additionally the table (x) tilts from 0 degrees (horizontal position) to at least 45 degrees (or more, at most 90 degrees). The table (x) supports a set of chucks (approximately 10 to 30), the chucks move from 0 to 360 degrees (at one end of the chuck is the 360 ​​degree gear).

There are three motors: 1) positions the chuck assembly between 0 and 360 degrees, 2) tilts the table from 0 to 45 degrees (or more), and 3) lifts the table with an accuracy of 0.1 mm.

Very importantly, the software needs to control:

1) motor 1 - chuck angle from 0 to 360 degrees;

2) motor 2 - angle of the table that supports the chucks from 0 to 45 degrees;

3) table elevation - from 0 to 15/20 cm (with 0.1 mm accuracy)

The software divides the CNC movements into every 5 seconds, it is necessary to control the spindle angle, the table angle and the table elevation every 5 seconds.

See open source software that can help: [login to view URL] and [login to view URL]

The dimensions: x axis (rectangle) can be 10 cm by 50 to 70 cm, in this a support for the chucks and for the motor that positions them; y axis (two pillars) between 20/30cm. Mandrel (cylinder)15 cm by 2 cm.

Weights to support: axis x, y, z up to 10 kg.

Please tell us if you work with 3d drawing (STEP or STP file), software programming (Linux CNC), machine construction (machining).

---

Contratamos, para el diseño de máquinas CNC (3 motores): diseñador mecánico 3D, programador de software de código abierto e ingeniero mecánico para fresar la máquina.

El CNC necesita tener una mesa horizontal (eje x) que se sube / baja con una precisión de 0,1 mm (por el eje y), adicionalmente la mesa (x) se inclina desde 0 grados (posición horizontal) hasta al menos 45 grados ( o más, como máximo 90 grados). La mesa (x) soporta un juego de mandriles (aproximadamente de 10 a 30), los mandriles se mueven de 0 a 360 grados (en un extremo del portabrocas está el engranaje de 360 ​​grados).

Hay tres motores: 1) coloca el conjunto de mandril entre 0 y 360 grados, 2) inclina la mesa de 0 a 45 grados (o más) y 3) levanta la mesa con una precisión de 0,1 mm.

Muy importante, el software necesita controlar:

1) motor 1 - ángulo del portabrocas de 0 a 360 grados;

2) motor 2 - ángulo de la mesa que soporta los mandriles de 0 a 45 grados;

3) elevación de la mesa: de 0 a 15/20 cm (con una precisión de 0,1 mm)

El software divide los movimientos del CNC en cada 5 segundos, es necesario controlar el ángulo del cabezal, el ángulo de la mesa y la elevación de la mesa cada 5 segundos.

Vea software de código abierto que puede ayudar: [login to view URL] y [login to view URL]

Dimensiones: el eje x (rectángulo) puede ser de 10 cm por 50 a 70 cm, en este un soporte para los mandriles y para el motor que los posiciona; eje y (dos pilares) entre 20 / 30cm. Mandril (cilindro) 15 cm por 2 cm.

Pesos a soportar: eje x, y, z hasta 10 kg.

Indíquenos si trabaja con dibujo 3D (archivo STEP o STP), programación de software (Linux CNC), construcción de máquinas (mecanizado).

---

CNC Programming Mechanical Engineering Mechanical Design Software Development Mechatronics

Project ID: #30499623

About the project

14 proposals Remote project Active 2 years ago

14 freelancers are bidding on average $184 for this job

sajjadtaghvaeifr

Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, More

$140 USD in 7 days
(24 Reviews)
5.4
contactsaafi

Hello how are you ? Im programmer for milling machine cnc using with experience more than 7 years Im perfect programmer looking to know more about your project i will delivry the project fastly and perfect message me f More

$100 USD in 3 days
(8 Reviews)
3.4
sagarsjolapara97

Hi, I am Sagar I have handled the design of product and carried out manufacturing and machining drawing and till final product I stood at every possible point of product raw material to finish product. I can help you More

$220 USD in 15 days
(1 Review)
1.9
mcollinscalz

As a young professional with a background in biomedical engineering (B.S. & M.S.), I own and operate a small team at Vitality Engineering & Design. I have seen the impact of bringing ideas to life and continually striv More

$140 USD in 7 days
(5 Reviews)
1.4
Sangeshwar

Hi, I read your project requirements. We have completed similar kinds of works very perfectly. We have completed more than 100 projects in Dissertations, Academic papers, business, technical, academic, commercial, fict More

$140 USD in 2 days
(1 Review)
1.0
yakymenkoihor

Hello, I have rich years experience in CNC programming I have read your project details carefully and thought I can finish your project well on time. Your job caught my eye, and that is one of the main reason I am bidd More

$300 USD in 7 days
(0 Reviews)
0.0
shahidkhan365

please provide exact diamensions of table and load handling capacity also type of jobs for machining, is there bevel cut facility required or not ? etc.

$230 USD in 25 days
(0 Reviews)
0.0
udaynayak1081

I have a experience in working on CAD modeling as well as physical machine assembly. I have worked on prototype small 3 axis CNC machine assembly.

$250 USD in 15 days
(0 Reviews)
0.0
PragneshB007

I, along with my batchmates, do a similar kind of work since four years. We are graduates of mechanical engineering. We are proficient in designing on SOLIDWORKS. You can see a video of our past projects in my portfoli More

$140 USD in 7 days
(0 Reviews)
0.0