Find Jobs
Hire Freelancers

My device with PIC processor programmed in C++ needs improving.

£18-36 GBP / hour

Closed
Posted over 4 years ago

£18-36 GBP / hour

In 2009, I had a small electronic device created, see www.noumic.com. The device works well but needs improvement. Light-mode works great, but sound mode is not quite right. Need new sound options. Battery life is not good enough. Perhaps the device can be made even more responsive! WAYS FORWARD A) I have old devices that can be dismantled, examined, and reverse engineered. Then, with an up-to-date PIC chip, programming can be refined and, if necessary, circuit changes made. B) I have one device that was made reprogrammable C++ using MPLAB IDE. If trained and learned on MPLAB IDE and C you maybe able to access the programming and improve it quite quickly. Bidders must have experience with programming PIC sensor chips and will help.
Project ID: 21701526

About the project

35 proposals
Remote project
Active 4 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
35 freelancers are bidding on average £27 GBP/hour for this job
User Avatar
Hi I am experienced electronics engineer with more than 11 years of experience. i can do it for you. I have worked with PIC for both audio and LED and other stuff. Please share the further details of the project. You can ship it to me easily. Please get in touch if interested Regards
£18 GBP in 40 days
4.8 (260 reviews)
7.9
7.9
User Avatar
Hello, my name's Jorge, I am an electronics engineer with 4 years of experience writing firmware for embedded devices. I have read the description of your project. I have worked with PIC MPLAB based projects before. I'd like to know the chip used, if the project uses the harmony environment, and, if possible, have a diagram schematic of the device to understand its basic peripherals and connections. I'll need an explanation from you as well of the current modes of the device, how they work, and the new features to be implemented along these. I'd be glad to discuss with you all the details of your project so we can start working on it as soon as possible. Thanks in advance for your time.
£29 GBP in 20 days
4.9 (99 reviews)
6.8
6.8
User Avatar
For more details inbox me so that we can discuss in detail. For more details inbox me so that we can discuss in detail. For more details inbox me so that we can discuss in detail.
£27 GBP in 40 days
4.9 (84 reviews)
6.8
6.8
User Avatar
Hi Sir, We are C/C++ experts lets talk to us . We are professional engineers and developers who do such projects from the last 10 years. We offer you our skills for this project at very low rates comparatively without compromising the quality of work. Let me introduce you to our company TURKTRONICS. We are TURKTRONICS. We are team of professionals with 10+ years of experience in Circuit designs, PCB designs, embedded system solutions, mobile app development, programming and software development. We provide complete end to end solutions for all kind of development projects. IOT is our strong point. In this bid, prototyping and shipping cost is not included however paying extra slight of money to include prototypes. We have the manufacturing facility and we produce the very high standard PCB boards and send ready products to customers doorsteps via DHL. We care about our clients and help them to get out of any potential problem throughout the projects and also give post completion technical support if ever required. We are very much looking forward to hear from you on this in coming days! Cheers!!! Ahmad Lead Technical Engineer TURKTRONICS An Internet of Things Company !
£22 GBP in 40 days
4.8 (48 reviews)
7.1
7.1
User Avatar
Hello, I am software developer with enough experiences on C/C++ for 13 years. I can work by full time for your project and trying to satisfy the requirements. I am designing the project from scratch and structure it well. I am following the project's design process exactly, and if any error is found, fix it within 24 hours and provide maintenance free of charge for a month. Client's idea + Programmer's good coding is the perfect result, this is my idea. I want to keep long-term relationship for customer so I want to give the nice result. C/C++ is very powerful programming language and I am majoring on it for long years. If you want the perfect result, please contact with me.
£30 GBP in 40 days
5.0 (30 reviews)
6.6
6.6
User Avatar
Hi,dear! I am quite interested in your project - 'My device with PIC processor programmed in C++ needs improving.'. :) I've already done this kind of project before. I am a skillful software developer who has rich experience in this field. If you contact me, you and I will be happy. Thank you in advance. Skills: C Programming, C# Programming, C++ Programming, Electrical Engineering, Electronics
£30 GBP in 1 day
4.9 (20 reviews)
6.4
6.4
User Avatar
HI there I am an electrical engineer with 8+ years of experience. I have hardware experience with PIC controllers and c++ programming. I can do this project for you. Let me know if you are interested. We can discuss further on chat
£30 GBP in 40 days
4.9 (34 reviews)
6.4
6.4
User Avatar
Hi, I can help you improve your project, I have experience reverse engineering PCBs and I'm a long-time user of MPLAB IDE, I have all the tools to work on it. let me know if you have any questions. best regards,
£27 GBP in 40 days
5.0 (19 reviews)
6.2
6.2
User Avatar
I have over 35 years experience as an electronic design engineer, please see my profile for more details Interesting project. I do have lots of experience using PIC micros and of loads of different types of sensors so may be able to help you Best Regards Dave Lelievre Poole, Dorset
£27 GBP in 40 days
4.9 (29 reviews)
6.3
6.3
User Avatar
Hello, We are IT-Engineers and Business Analysts, creating complete web and mobile solutions, for already more than 15 years, supporting our products with custom digital marketing strategies and instruments. Before the collaboration starts - the initial briefing round takes place, which is free of charge. We are interested in all the details of your specific case. They will allow us to obtain a better vision of your concept and help us create unique solutions for you. Let's schedule a convenient time for the first kick-off conversation. Best Regards, Andrei Costenco Team Lead, Business Analyst, Senior Engineer Dev Experts Team
£36 GBP in 30 days
5.0 (2 reviews)
5.9
5.9
User Avatar
Dear Sir, I am an expert with more than 15 years of experience in Firmware Development, PCB Layouts, Prototyping and Product Engineering. I have veast experience with 8-bit, 16-bit and 32-bit Architectures developing ultra-low power designs with complex algorithms. I have checked the details of your work and and fully understand your requirements. I am resourceful Engineer and have all PIC series (PIC16F, PIC18F) with me. I am also expert in USB PIC Bootloader and other functions. I am interested in your project. I assure you Best working code with low cost. Regards Talha
£18 GBP in 28 days
4.7 (65 reviews)
6.2
6.2
User Avatar
Hi, I have more than 8 years of experience in embedded system design and development. I have expertise in product development using various MCUs with different peripherals, sensors(acclerometer, gyroscope, temp sensor, humidity sensor, light sensor, strain gauge sensor, heart rate sensor, CO2 sensor, pH sensor, magnetometer and many more), displays(LCD,OLED), wirless modules(BLE,WiFi,RF,ZigBee,GSM,GPS etc.), motors, power supplies(LDO,Switching regulators, buck-boost converters etc.), batteries(LiPo, LiIon, Alkaline etc.). I have worked on Microchip products for approx. 2.5 years. I have expertise in PCB design and firmware development on PIC16F,PIC18F,PIC24,PIC32F series MCUs, ENC28J60,ENC424J60 network processors, MCP2551, ADCs, DACs and many more. I have developed firmware using MPLAB IDE and MPLAB X IDE with XC8,XC16,XC32 compilers. Let's have discussion and go ahead. Regards, Jitendra
£28 GBP in 40 days
5.0 (14 reviews)
5.5
5.5
User Avatar
Hi sir, i have read your requirement carefully. I am very familiar with develop C++ on electronic device . I can do your project perfectly and exactly without any risk. If you wanna confirm me, please check my work history and portfolio kindly. Then, you can know about my ability that can do your project enough. Especially, this is my experienced and successful work before. Also i have fluent English skill, so you can communicate with me very easily via voice call and thus, you can save your time. No problem for working with me now. So if we work and do our best for one purpose, we can get great success each other. Please call me and discuss about your project seriously. I'm always here and ready to talk with you right now. I'll wait for your call. Thanks.
£27 GBP in 40 days
4.4 (16 reviews)
5.9
5.9
User Avatar
Hello, Mr Perry Rabbitts, I have carefully read your project description and I see that you are looking for a developer experienced with PIC sensor chips and C++ to work on your Noumic Device. This is where we can be of help to you. I have visited your site and read about your interesting device, I consider that the Noumic Device is a really wonderful and useful healthcare solution nowadays, I am sure this device has promising future and we will be happy to make all necessary improvements. We are highly experienced with PICs and batteries and proficient in C/C++. Let me describe a few PIC-based projects to prove our skills. Let’s have a look at the project “900 MHZ Modules”. The integrated module is based on AT86RF212 chip and PIC18F24J50 microcontroller for DIY projects. It allows to carry out communication at a frequency 700/800/900 Mhz. Schematics, PCB design (Altium designer), prototypes and test firmware were made. We developed Interface converter for character LCD display. It allows a user to work with a standard character LCD with the parallel interface via UART. This project was based on PIC microcontroller. Schematics, PCB design, prototyping and firmware development were made as well. I am sure that the device can be made more responsive. I would like to get in touch with you and discuss your project in detail. I am looking forward to hearing from you. Kindest regards, Daniel Ternovsky
£27 GBP in 40 days
5.0 (20 reviews)
5.2
5.2
User Avatar
Dear Sir, We are a small R & D company, based in Bulgaria, Europe. We work exclusively with U.S. partners. We specialize in developing Embed systems based ST(STM32), Microchip (Atmel )(PICs,AVR,Atmel ARM) and TI (MSP430) MCPUs and peripheries. We realize projects with requirements similar to yours. See my profile in Freelancer.com Our tools for design Microchip(PICs ) based systems are: MPlab IDE PICKIT3 If we receive more information about your project, we will give you a real cost and time to implement your project. We based in Europe, not customs problems for delivery models and samples for testing Best Valeri T.
£27 GBP in 40 days
4.3 (12 reviews)
5.9
5.9
User Avatar
Dear client. I have read your project description and I think I can be a candidate of your project. I have been confident and sure that I can complete your job. Please let me know, if you are interested in me. Thank you, sir. I would appreciate, I can disscuss further with you on your project - My device with PIC processor programmed in C++ needs improving. My best skills are C Programming, C++ Programming, Electronics, C# Programming, Electrical Engineering and so on.
£30 GBP in 1 day
5.0 (6 reviews)
4.6
4.6
User Avatar
I have read your project carefully. I am very interested in your project. I am a Microelectronics engineering expert. I have a lot of experience on ARM, FPGA, DSP, Arduino, Raspberry, PLC, PIC, ATMega and so on. I can do help you. And I hope to cooperate with you. Tell me your opinion. My regards.
£20 GBP in 40 days
4.9 (8 reviews)
4.5
4.5
User Avatar
Hello. Our team have good device expert. He have experience of PIC, VHDL, IOT.... I can help with that and can start right away! I 'd like discuss with you via chatting. I will wait. Thank you! From Admetus!~
£27 GBP in 40 days
5.0 (5 reviews)
3.5
3.5
User Avatar
Hello, first I want to say that the tecnologies used in your device are my passion, I like everything that has relationship with programming and electronic so I am exited with your project, if you give me more details about your project we could to work together. Regards !! PD. I have more that 10 years of experience working with C++, with Pics and MPLAB.
£27 GBP in 40 days
4.4 (4 reviews)
3.6
3.6
User Avatar
Hello I am a senior Microcontroller developer and electronic engineer. I read your description and checked your requirement. I have developed the Microchip MCU firmware on MPLAB and design the circuit and PCB. I checked your device and I can develop your device perfectly. I can develop the firmware of Microchip MCU like PIC12,16,18,24,30,32,33 and dsPIC. Also I can design the MCU main board and peripheral circuit and PCB using Altium Designer and EAGLE. I can work full time for you and I will finish the project asap. I hope to discuss more details via a private chatting. I will look forward to your reply. Thank you for reading my proposal. Best regards
£27 GBP in 40 days
5.0 (2 reviews)
3.2
3.2

About the client

Flag of UNITED KINGDOM
Reading, United Kingdom
5.0
3
Payment method verified
Member since Sep 25, 2019

Client Verification

Other jobs from this client

I need a business plan
£750-1500 GBP
Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.