Build arduino based variable air pressure controller

Closed Posted 5 years ago Paid on delivery
Closed Paid on delivery

I am an avid outdoor enthusiast, I like to take my Tacoma on outdoor/overland adventures. Part of this is managing the air pressure of the tires on the truck. While offroad I need to drop the pressure of the tires down to as low as 5lb per tire or all the way back up to street pressure of 40lb. The pressure of these tires would need to be adjusted depending on the terrain. I'm looking for help to build a controller module that would allow the automatic inflation or deflation of the tires to whatever pressure I define. I am looking for help to take off the shelf parts to create a controller module. This module would need to interface with 1) pressure transducer to read the current air pressure 2) Air pressure solenoid: this would be used as an output to interrupt the air flow when the desired air pressure is achieved 3) Secondary solenoid: to be used to allow air to escape when deflating the tires. There would also need to be an LCD control panel that would allow you to 1) Monitor current pressure 2) define intended air pressure via buttons (up or down) or via rotary knob 3) view defined pressure set with #2 4) Select between an inflation and deflation modes. The control of the air compressor should be considered independent of this project and should be assumed that the compressor will automatically turn on/off when the pressure is achieved.

Arduino Electrical Engineering Electronics Microcontroller

Project ID: #17015452

About the project

21 proposals Remote project Active 5 years ago

21 freelancers are bidding on average $585 for this job

sagradoamicus

Hi I am experienced electronics engineer with more than 8 years of experience. I have read the details , I have a question what we have to provide to complete the project. Please get in touch to discuss it further More

$555 USD in 10 days
(254 Reviews)
7.9
amelectronics

Hello I have experience in designing electronics circuits and can make your project. For your assurance, i can just say that, "I AM IN CHINA RIGHT NOW AND I CAN SHIP COMPLETE WORKING PROTOTYPE TO YOU AND WILL GET THE More

$1000 USD in 30 days
(61 Reviews)
6.9
mechatronicsengr

Hi, I hope you are doing well. I have expertise in embedded system design and development. i have reviewed your project detials which requires a development of automatic inflation and defamation device for a Tyre. More

$684 USD in 10 days
(88 Reviews)
6.9
shahbaz1980

Hi There, We will design, test and deliver the hardware. It will be equipped with pressure sensors and valves to inflate or deflate the air. further more a touch screen will be provided to enter the desired pressure More

$2000 USD in 45 days
(61 Reviews)
6.9
MUhammadt429i

I have long experience with 8-bit and 32-bit micro-controllers. I work with PIC , AVR , ST and NXP micro-controllers. I use KEIL IDE , Atmel Studio and MPLABX IDE . Regarding your project , I would use any AVR chip More

$277 USD in 10 days
(39 Reviews)
6.0
urbito

Hello there! Hope you doing good! If you still need this to be done, be sure to contact me. Lets make something awesome! Greetings!

$500 USD in 21 days
(35 Reviews)
5.4
AhmedSobhiSaleh

Hi, I am a professional electrical engineer. I am an expert in designing and simulating systems on and writing arduino codes I also have the hardware to test and confirm working code. You can see some of my work in my More

$277 USD in 10 days
(24 Reviews)
5.1
poduzov

Hello I'm an electronics engineer with tons of experience and my own Arduino lab. Please contact me to discuss the details. Best regards, Dennis

$444 USD in 10 days
(7 Reviews)
4.7
soltracker

How r u?Buddy,Its me imad,,have done 200+ projects regarding matlab, arduino, vb.net, c#, data entry and much more. U will feel brotherhood............

$250 USD in 10 days
(28 Reviews)
4.1
wenzhaoxu

Hi, I think I can do it. I am expert in Circuit design/PCB layout/firmware develop. I have more than 19 years experiences. I have developed a lot of products, some of these is used in China High-Speed system. Plea More

$750 USD in 40 days
(7 Reviews)
5.2
parthipankanaka

I hold master degree in Instrument Tech and having about 35 years of expertise in real time embedded software and hardware applications. My technological areas are automotive and aerospace.

$555 USD in 10 days
(1 Review)
2.0
chebaanemohamed

I had a project some like that based on the arduino uno and i can improve it using the raspberry pi and arduino

$555 USD in 10 days
(0 Reviews)
0.0
vijithgkurup

I have good knowledge in Arduino. I have good exposure in c and c++ programming . Award me this project I will complete it.

$555 USD in 10 days
(0 Reviews)
0.0
BMAyman

I can do this project as you described within 1 day from receiving your acceptance. and I can make any modification you want . Kindly send me the name of pressure sensor that you will use and Name of solenoid and More

$250 USD in 3 days
(0 Reviews)
0.0