Closed

Design and produce reference ADC and DAC PCB modules using kicad

I'm looking for an experienced PCB designer at an affordable rate. I need help creating modules based on references designs of DAC/ADC chips.

I'm working on an audio based project and I've had much success with inexpensive DAC/ADC modules found on ebay. I've tested PCM5102A and PCM1808. However, the parts that I actually want to use don't have a simple module for sale.

So I'd like to hire someone who can use Kicad to create 2 different modules. The resulting parts will be similar to those modules found for the PCM5102A and the PCM1808 (see attached images or search ebay). I'll tell you which parts I want to use in my project once we decide to move forward but they are very similar.

This project will require

- Drawling a schematic using Kicad or Eagle based on the reference designs in the IC's datasheet and EVM modules.

- Placing the components to the PCB layout and routing the lines on the PCB using CAD

- Order low-quantity PCB's and parts.

- Assemble a few test boards, or have them assembled by a 3rd party.

- write a simple Arduino driver to intialize the I2C controlled DAC/ADC parts

- Test the PCB.

- Provide all source code and copyrights for your work to us for use in future projects.

The modules will have the BCK, LRCK, SCK, Tx (DOUT), Rx (DIN), SDA, SCL, PWR lines similar to what is seen on the attached images for simple hookup to an external DSP. One of the parts that I want to use (unfortunately) is in a VQFN package so we'll need some special work to get that created.

Skills: Arduino, Circuit Design, Electrical Engineering, Electronics, PCB Layout

See more: Health insurance project modules using java , joomla advertising modules using parameters, design circuit dc power supply pcb, android, circuit design, java, electronics, c programming, pcb layout, electrical engineering, arduino, electronic product pcb modules embedded system outsorce, xilinx fpga adc dac, design produce product, adc dac spartan, adc dac code vhdl spartan, adc dac vhdl code spartan, adc dac spartan vhdl, adc dac vhdl spartan, adc dac board

About the Employer:
( 0 reviews ) United States

Project ID: #17376473

23 freelancers are bidding on average $1228 for this job

sagradoamicus

Hi I am experienced electronics engineer with more than 8 years of experience in PCB design. I have completed a number of projects here. Please review my profile to see the feedback. I have read the details. I can p More

$1500 USD in 20 days
(237 Reviews)
7.8
shahbaz1980

Hello, Have a great day. We will design and prototype the circuit to make sure that it works properly. Please feel free to contact us. Regards, Shahbaz.

$2500 USD in 45 days
(53 Reviews)
6.9
engrhumza

hello I hope you will be fine , I am interested in this job , I have few questions. 1: I have to ship you PCB ? 2: you will ship us components for soldering and assembling including modules? 3: Quantity for PCB fab More

$750 USD in 7 days
(55 Reviews)
5.7
cpp2048

I can assist you in designing these boards nicely using Eagle CAD in which I have more than 8 years of experience. Will order the PCB and parts to test the codes. I do have precision equipment (Keithley DMM6500 their r More

$1500 USD in 20 days
(35 Reviews)
5.5
ShunJohn

Hello. Thanks for posting this project. I am an expert having rich experience in schematic circuit, PCB design and firmware. best regards.

$1250 USD in 20 days
(9 Reviews)
5.1
Aravindh2394

Hello I'm an electronics engineer and I can help you with the custom ADC/DAC module build. I have designed various custom modules and Arduino shields. contact with the details for more information.

$750 USD in 15 days
(13 Reviews)
3.9
$833 USD in 10 days
(8 Reviews)
4.1
Ktronics

Sir I am an Electronic Product Design Engineer freelancer with 20 years of experience in Electronic System Design,Firmware Development, PCB Design & PCB Manufacturing. I am proficient with a wide range of PCB/ schemati More

$1250 USD in 7 days
(2 Reviews)
2.8
phielectronicdes

We can provide full PCB design, full prototype, firmware development and testing for your project. We work on Altium, thus you will have comprehensive libraries for the parts used and accurate 3d models of the boards. More

$1022 USD in 25 days
(3 Reviews)
2.2
dwijatech

Sir, Please go through the profile and portfolio. We can help you with your requirement. We have inhouse pcb design,manufacturing and assembly and software coding facilities. Looking forward towards your valu More

$1250 USD in 20 days
(1 Review)
2.4
businessaumraj

Hi, We are 10 years old designing company and using OrCAD for schematic and PCB layout. i can understand in ADC-DAC part, You need to match impedance part to get batter accuracy level and eliminate noise and loading More

$1111 USD in 45 days
(1 Review)
2.4
powerful19913

Hi,sir. I can finish this project as you wanted and I will work full time for this project. Because I have tons of experience with analog and digital electronics and I designed several boards using TI audio IC. Spec More

$1444 USD in 20 days
(4 Reviews)
1.9
HXElectronics

Hello, I am from Shenzhen China, i can finish this project also prototype if you want. please share more information with me.

$1250 USD in 20 days
(1 Review)
2.1
WDTec

We are a team of engineers experienced in electronics, circuit design, PCB design, micro-controller programming, Arduino and wireless protocol. We have designed and developed circuits and products in the field of we More

$800 USD in 20 days
(1 Review)
1.1
$950 USD in 25 days
(2 Reviews)
1.3
shubhankert

sir, i have read your details and would like to inform you that i have some sample projects to show you my work please ping me to get started with discussion

$1250 USD in 20 days
(3 Reviews)
1.1
Cognegic

Dear Hiring Manager! I hope you are doing great! We are specialized in PCB design, and we have Team of 60+ people working who has 10 to 22 years of experience. We have 100% delivery rate and we assure you of 100% s More

$1250 USD in 20 days
(1 Review)
0.3
Celeritous

I have over 40 years of experience in electronics design and PCB layout. I have used KiCAD exclusively for the last 5 years as my primary PCB design tool including designs of up to 8 layers. Examples of my open source More

$1400 USD in 21 days
(0 Reviews)
0.0
REDSILICONLAB

I have seven years experience in the embedand systems hardware and software design if you assign this I will deliver with good quality and within the time.

$1333 USD in 15 days
(1 Review)
0.0
$1111 USD in 7 days
(0 Reviews)
0.0