Dynamic active academic (non-commercial) researchers required in EV power generation and smart mobility ,Aerodynamics, Electrical ,mechatronics and mechanical engineers

$35-200 USD / hour

Closed

Posted

over 1 year ago

$35-200 USD / hour

A dynamic Emarati firm is looking for open minded researchers with a good incentives and salary scale based on experience to be hired as Free lancing scheme in its R&D division Mission : to develop the design of second phase research of a synchronous machine in motor mode , air power turbine includes a full study of current prototype design and assembly , further develop the value chain/supply chain Expected outcomes : 1- Enhanced design from phase 1 to phase 2 of the research 2- Enhanced prototype 3- IP registration 4- conclusions on a list of integrated or separated off grid charging technologies in EV industry to solve the huge capital requirements of EV chargers stations across a specific country and to overcome these challenges to support the EV industry . Interested researchers are welcome to apply over freelancer.com platform ,kindly share your portfolio to arrange for an interview Note: Budget per person and it depends on the hands on experience & availability commitment. Total No of required researchers :3 1 Dynamic open mined engineer in aerodynamics with hands on experience(Wind Turbines design) 1 Dynamic open minded engineer researcher(non commercial) in the field of design of electrical motors (magnets design) . 1 Dynamic support researching engineer for studying supply chain and preparing reports (technical writer) Total no of hours /Day: 4 Hours (may be agreed upon interview/chat acceptance through Freelancer.com) Total No of DAYS: 6(May be agreed upon chat acceptance via freelancer.com platform) Thanks and Regards R&D Dracozen UAE

Electrical Engineering

Mechanical Engineering

Renewable Energy Design

Mechatronics

Mechanical Design

Project ID: 35721600

About the project

26 proposals

Remote project

Active 1 yr ago

Looking to make some money?

Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

Get paid for your work

Outline your proposal

It's free to sign up and bid on jobs

26 freelancers are bidding on average $78 USD/hour for this job

@liveexperts123

Hi there,I'm biddin on your project "Dynamic active academic (non-commercial) researchers required in EV power generation and smart mobility ,Aerodynamics, Electrical ,mechatronics and mechanical engineers " I have read your project description and i'm an expert in Mechanical Engineering domain therefore i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the project. Thanks. .. .

$50 USD in 937 days

4.9

(36 reviews)

6.9

@sajjadtaghvaeifr

Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, aerospace, biotechnology, computers, electronics, microelectromechanical systems, energy conversion, robotics and automation, and manufacturing. I am also expert in mechanical engineering softwares including Ansys, Fluent, Comsol, CATIA, Solidworks, Abaqus and Inventor. I'm interested in your project. Please send me a message so that we can discuss more. Best regards.

$50 USD in 40 days

4.8

(90 reviews)

7.2

@afzalwaqas94

Hi ! Greetings! I am a Mechanical Engineer with expertise in Mechanical Design. I have done projects that include Design of Telescopic Knuckle Boom, Design of Steel Space Frame Chassis for Formula SAE Vehicle, Design of Hydraulic brick machine, Design of Shell and Tube Heat Exchanger, Design of Helical Coil Steam Generator, CFD of vertical axis wind turbine to optimize TSR, CFD of jet engine compressor for recovery of wake region, Design of wing to optimize lift, etc. Given my experience with design projects, I believe I am the right person for this job. I can show you my previous work if you want. Kindly contact me to discuss further. Regards,

$60 USD in 30 days

4.7

(77 reviews)

6.5

@bchandra1955

I am experienced engineer with 43 years of experience. You may see my profile and reviews Regards Brajesh Chandra

$40 USD in 40 days

4.5

(100 reviews)

6.4

@maherjaffel162

Hello I recently saw your project details for "dynmic active academic".After reading the job description, I quickly realized that your requirements precisely match my abilities. I'm a master of details, colors, 3d modeling, 3D printing designs also rendering design, 3d/2D home plan home model interior, exterior, elevation, HVAC, object models 3d human characters, etc please ping me so we can discuss . https://www.freelancer.com/u/maherjaffel162 Thanks and regards Maher Jaffel

$50 USD in 40 days

5.0

(45 reviews)

5.5

@rainbow

I am dynamic energy auditor and designer of unconventional energy system and EV I am researching engineer and technical writer I can work with your company on freelancing basis Please discuss more in the interview

$118 USD in 40 days

4.7

(29 reviews)

5.6

@ENG1mga

Greetings, السلام عليكم ورحمة الله وبركاته I hope you are doing fine. I have Master in mechanical engineering, I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, aerospace, biotechnology, computers, electronics, microelectromechanical systems, energy conversion, robotics and automation, and manufacturing. I am also expert in mechanical engineering softwares including Ansys, Fluent, Comsol, CATIA, Solidworks, Abaqus and Inventor. I have looked at the mentioned details and I am confident of my ability to deliver. Here is why, I am a mechanical engineer with over 6 years of experience in the use of CAD tools (Solidworks, AutoCAD and Fusion 360). I deliver detailed 2d and 3d designs for various manufacturing technologies such as laser cutting, CNC machining, 3d printing, injection molding, etc. I always have the end product and manufacturing method in mind so my designs are practical, saving costs and workable. I'm interested in your project. Please send me a message so that we can discuss more. Hope to hear back from you soon!

$40 USD in 40 days

4.8

(80 reviews)

5.6

@saleiz2019

Hello there This is a mechanical engineer and a research assistant with a commendable ANSYS Fluent expertise to do FEA and CFD analysis to help the research process I am ready to start any time, I have athermal engineering masters so that I can fit in the power generation and turbine section Looking forward to be the part of your team Best regards

$50 USD in 20 days

5.0

(22 reviews)

5.5

@hayat38402

We are a team of Expert Mechanical design Engineers, We have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas: • Manufacturing design • Product design • CAD/CAM • Matlab/Simulink • Simulation like CFD, FEA, structural analysis • Designing tools like COMSOL, SolidWorks, ABAQUS, CATIA, ANSYS, 3DMax We have good command over REPORT WRITING, We can show you many samples of our previous reports. We can discuss further details in the message box.

$118 USD in 40 days

4.6

(55 reviews)

5.9

@HarimohanG

Good day, I have 30 years of experience in Electrical Mobility/design, and I can full study of current prototype design and assembly in air power turbine in a quality and timely manner. I would like to have a thorough discussion on this project as there are certain suggestions from my side After dedicating more than 30 years to the electronics design and development, I am passionate in designing the best products Technology wise I have worked on all the latest technologies like GSM, 5G, Lora, Air Power Turbine etc. And have worked on more than 20 design tools for designing and simulation purpose Some of the generic queries from my side are: 1. What is the application of this product? 2. What will be the ambient temperature of this product? 3. What are the mechanical constraints to be taken care of? If you are someone who wants to benefit from my experience just message me Hi and I shall be there for you Regards Hari Mohan

$35 USD in 40 days

5.0

(2 reviews)

4.8

@youhana167

Mechanical Engineer Expert Hi there, I will do this project according to your concepts and requirements. I would share previous work and samples with you. I would give high quality work and results. I’m professional mechanical engineer expert in CAD design, Machine Design, 2D Technical Drawings, 3d modeling and industrial products with professional engineer team. I have gone thorough in your project description. I have worked on several similar projects. I would give better design and solution for your project. I’m interested in your project. I’m full-time freelancer. I would give you quality work because your sanctification and work quality is my first priority. I’m waiting for your message to discuss. Thanks!

$118 USD in 40 days

5.0

(22 reviews)

4.8

@baji34

I am Mechanical engineer (PhD from Germany) working in a design office with 20 years of experience in Auto cad Pro Engineer Solid Works, Gambit, ANSYS and Fluent Software, report writing as well as project management in the related fields. i had already performed simulation on rotating objects like propeller of ships, turbine blades and rotating disk etc. I believe that my experience and skill in this background will prove to be of great help to you. I am waiting from you for further disussion

$40 USD in 24 days

5.0

(5 reviews)

4.7

@fayyazs789

Hello DracozenTA2023, I m an Architect/Civil Engineer/BIM/CAD Expert and will offer you the Best Discount. You can pay me a reasonable price + Good Review only. I want to review your Dynamic active academic (non-commercial) researchers required in EV power generation and smart mobility ,Aerodynamics, Electrical ,mechatronics and mechanical engineers plans/sketches,/ideas and work with you. I know you have many proposals to look through, to make this quick. Please get in touch with me to discuss this project in more detail. My first priority is that my client will be satisfied with my work. I am an expert in these softwares, ✔ ArchiCAD ✔ Autodesk Revit ✔ Autodesk AutoCAD ✔. Autodesk 3ds max ✔ Sketch Up✔ Autodesk Navisworks Manage✔ Estimation ✔ HAPE ✔ ETAP✔ Tekla If you assign me your task, I will carry out your project with the best quality. Please come over chat and discuss your requirement in a detailed way. Thanks Fayyaz and Team

$170 USD in 7 days

0.0

(0 reviews)

2.4

@rv703

A senior mechanical engineer with more than 10 years of experience in research and industrial fields. A creative leader who believes in solving any problem in the industry. A multi-task person with confident skills and commitment that his innovation motivates teams to take ownership of service excellence. I have an experienced research and development manager with a demonstrated history of working in mechanical designing, industrial engineering, and fluid; I have also been designing systems to prevent petroleum and gasoline evaporation. I have created and produced a Micro Gas Turbine. I have been working on fluid and structural simulations. I am skilled in various technical software such as ANSYS Fluent and ANSYS Workbench, Solidworks, and AutoCAD. I have worked with 3axis CNC milling and have written G-code with Solidworks Cam. Also, I am skilled in Microsoft Word & Excel & PowerPoint. I have worked with general software such as adobe photoshop, windows, WordPress, and local networks. I am proficient in creating and managing hosts, domains, and websites. I worked in mineral research (refinery of Titanium, Ferros, Gold), mechanical and oil, and chemical analysis (Rotary industry, Furnaces, and gas stations). I Invented SPPE (System for Prevention of Petroleum Evaporation), Multi-Axial Centrifuge, and Single Container Centrifuge.

$139.77 USD in 40 days

0.0

(0 reviews)

0.0

@daniilsolution

hello I would like to work for your company. I am a master of engineering and am interested in wind turbine design. I think my skills can be suitable for your company. I would like an interview with you.

$80 USD in 40 days

0.0

(0 reviews)

0.0

@dartadab

⭐Hi⭐ I am very interested in your project. Your project is very suitable for me. I am a Professional Product Designer/3D Modeler/Mechanical Engineer/FEA From Texas. I can provide the manufacturing drawing sheet of the synchronous machine in motor mode , air power turbine for you. I work in Solidworks, AutoCAD/CAM/CAE, Autodesk Fusion 360, 3D Max, Blender, sketchup. If you want to get a top quality product, please hire me. You can check my profile. https://www.freelancer.com/u/dartadab I am always respectful of my clients and try to figure out all issues about their project. There is available within your budget. Looking forward hearing from you. Thanks a lot.

$35 USD in 40 days

0.0

(0 reviews)

0.0

@aschutsehay0123

I will do this project neatly with specified time using appropriate methodology since I have experience on this type of works.

$78 USD in 48 days

0.0

(0 reviews)

0.0

@deepaklathi2

I have performed various power systems studies simulations and electromagnetic analysis simulations during my job. I have comprehensive experience in industrial applications of various AC motors, DC motors, Servo motors, Stepper motors, AC Drives, DC Drives, Power Electronics Systems. I can perform the design and analysis of electrical motors and electromagnet design using the professional software's such as ANSYS, COMSOL Multiphysics, MATLAB. I have comprehensive research experience in the design and development of high voltage power supplies and development of earthing impedance measurement techniques. I possess hands on experience in maintenance of electrical and electronic machines and maintenance of electrical substation equipment used in the Industry. My skills are a good match for the the position of engineer researcher in the field of design of electrical motors (magnet design).

$50 USD in 40 days

0.0

(0 reviews)

0.0

@Antonio447

Dear Sir or Madam, I´m electrical engineer actually working on different renewable projects focused on eolic plants and photovoltaic plants. I also worked in different substations which include synchronus condenser (rotative machines) like dynamic compensators and also in motor mode, here in Spain. I´m very interested in your offer. I can design these systems and also write all the documents, budgets, layouts with Autocad...etc. I also can prove my experience.

$50 USD in 20 days

0.0

(0 reviews)

0.0

@sidofficial7

I would like to be in the position of Dynamic support researching engineer for studying supply chain and preparing reports (technical writer) As an energy and environmental engineering undergraduate with a fresh perspective, I am excited about the opportunity to work as a freelancer on the second phase of the research for a synchronous machine in motor mode and an air power turbine. My understanding of the energy and EV industry, as well as my experience in design and research, make me a suitable candidate for this project. I am eager to contribute to the development of the prototype and the design, as well as investigate solutions for charging EV stations in the EV industry. I am highly motivated to apply my skills and knowledge to help achieve the expected outcomes of the project, and I am willing to commit to the project's schedule. Please let me know how to proceed with the application process and and you can see my previous works in my portfolio. I am also open for further discussion about my qualifications and availability.

$35 USD in 40 days