Simplified Apple Watch
$1500-3000 USD
Paid on delivery
Design a simpler Apple watch that serves the listed functions.
The watch must have a screen in similar size of a rectangular Apple watch. The screen must be solar powered. (PLEASE NOTE: There are plenty of solar powered watches already in existence)
The screen must be a touch screen and have pages that the user can swipe back and forth from: One main page, swipe left page, swipe right page, and a swipe right and up page.
The outer rim of the watch must have an exterior rim attached that can light up in three colors: Blue, red and green, when respectively activated.
The back of the watch must have an inaudible vibrator installed.
The power button can be located where it is convenient for the designer.
There will be two buttons on the main screen, one button when you swipe right and another button when you swipe right and up from the main screen.
Each button triggers a different response. The top button (blue with insignia) on the main screen turns the outer rim lights and main screen blue and allows them to flash slowly for five minutes. Vibrator pulsates with the flashes.
The bottom button (red with insignia) on the main screen turns the outer rim lights and main screen red and allows them to flash slowly for five minutes. Vibrator pulsates with the flashes.
The button upon swiping right (green with insignia) turns the outer rim lights green and flashes the lights twice slowly. The screen turns bright green for duration and reverts back to the main screen upon completion. Vibrator does not go off. Pressing the green button only clears the status of the watch the button was pressed on.
The button upon swiping right and up from the main screen (red with insignia) turns the outer rims red and stays solid red for fifteen minutes. The screen turns dark red. Vibrator pulsates rapidly. The nearest one hundred watches are triggered no matter which account they are located on.
When one button is triggered on one watch, the nearest twenty watches within a certain radius trigger the same color and pattern at the exact same time except for the green button which only works for each individual watch.
Pressing a new button cancels any existing status. Pressing the green button clears all other status.
Swipe left on the main screen and it will prompt the user for a hand drawn (finger drawn) pin.
Upon entering the PIN the watch unlocks a new permanent feature which will now display a GPS tracking, similar to a Tile, to any watch that has been triggered blue or both red colors within a mid size radius.
Multiple button pushes in a radius will trigger a layering effect of GPS pages that spawn in order of priority.
Priority 1 - Red button upon swiping right and up from the main screen.
Priority 2 - Red bottom button on the main screen
Priority 3 - Blue top button on the main screen
The user will be able to clear one layer by swiping it left, it will also disappear on its own once the green button for that unit is pressed, or once the five or fifteen minute window expires.
Each watch will come with its own serial code that can be uploaded to our website and grouped with other watches to one account. Serial codes can be added and removed at any time.
The two main page buttons only trigger watches that are on the same account, but the other two buttons can trigger all watches in a certain radius no matter which account they are located on.
The website will allow the account user to set and change the GPS finger drawn code.
An individuals account keeps track of all of the watches linked to it. Generating a report of where each button was pressed each day by each watch within a certain radius.
These watches must be durable. They must be water resistant, shock absorbing, and the wrist bands made of a durable environmental friendly material and cost $40 to $50 retail.
Please be advised there are two components to this project:
- Three watches to test all functions properly
- A generic website with all the requested functions.
Project ID: #26628240
About the project
4 freelancers are bidding on average $2594 for this job
Dear Client. I have just read your job description and your project is really interesting to me. I have many experiences working for 12+ years with Circuit design, PCB design, manufacturing functional prototyping with More
Hello, I've complete MS Electric Engineering. I have plenty of experience in firmware development and micro-controller developments. I can write the firmware based on Arduino, Raspberry Pi, Pic, Atmega, FPGA, ARM, DSP, More
