Motherboard PCB, Rasberry Pico

Greetings, Thanks for having me. I am an electronics engineer having over five years of experience as a professional PCB design engineer. I have developed many PCBs utilising Altium Designer, KiCad, EasyEDA and Proteus. List of my clients include many industries and individuals as well. You can checkout my diversified portfolio and I am sure it will make your selection easier. I have gone through your project brief and attached photos of your system. I will be providing you the schematic, PCB layout and all the production files as well. You can contact me any time as I always respond earliest even after completion of the project at hand. There is one thing that I couldn't find in you attachments and that is the PCB dimensions. Can you please share that detail as well? I am looking forward to hearing from you soon. Best regards, Nuaman Saghir

Hello, thank you for your job posting read your description about-MOTHERBOARD PCB am a senior electrical engineer. have plenty of experience in firmware development and micro-controller developments. can write the firmware based on Arduino, Raspberry Pi, Pic, Atmega, FPGA, ARM, DSP, PLC and so on And l can design the circuit by the Altium, Eagle, KiCAD, Allegro & OrCAD, PADs provide I T the services - Gerber files, Netlist generation, BOM generation and 3D Models of PCAD and ECAD am also good at AutoCAD, Solidworks. And | can simulate all circuits with Proteus, LT-spice, Matlab, Simulink, Multisim, and Labview as well. Due to my experience in firmware development, I will bring you the perfect result in time with high quality. will also give you a detailed explanation of the process you can visit my freelancer profile to check the reviews of related tasks https://www.freelancer.com/u/binyameen441 Looking forward to hearing from you soon Thanks

Greetings, I have read and understood your requirements, you need someone expert in PCB designing. I am an electronics engineer and expert in PCB design tools and multilayer PCB designing with 3d step files using KiCad, Altium designer, EasyEDA, Multisim, EagleCAD and Proteus. I will do the design using your preferred tool. You can see my portfolio/ reviews and feedback regarding similar projects. Please send a message in chat to discuss further details. Regards, Ahmed.

Hi! I interested your project and with my experience, I confident that I can help you complete this job in short time with high quality. Please tell me know when you have free time, we will discuss more. Looking forward to work with you. Regards, Tung

Hi! I have understood your requirements about your project with every detail of it. I am an Electrical Engineer with more than 9 years of experience in electronics, circuit design, PCB layout, Verilog, FPGA, Embedded systems, microcontrollers, Proteus, Arduino, ESP32, Raspberry pi, NB-IoT, MATLAB, PLC Design, Algorithm, and Product design. I can assure satisfactory work. I'll be glad to work with you. Thanks

Hello, I can design motherboard PCB. I have experience working with RPi PICO, CANBUS. I can provide you Schematic, PCB Layout, Production ready files.

I am a professional PCB design engineer i have expertise in PCB and circuit design for industrial level products. I can help you to reduce the cost of the board, dealing with industrial level-based PCB and circuit to make it cost effective and design improved is my daily routine. I have more than 4 years of experience as hardware design engineer. I am working as hardware design engineer in a reputed firm based in Germany, where my job is to analyze the working of electronic circuit and bring new improved design for our costumer. I understood the project description i can deliver your task as per your requirements at a reasonable budget. Your satisfaction will be my priority, you can trust on me. I am sure you will consider me for this task when you take a look to my portfolio. Looking forward to your earliest response. Best Regards Muhammad Adeel

Dear Valued Employer, My name is Martin and I am an engineering physicist with extensive experience in the field of circuit design, circuit prototyping and PCB design. As I understand from the project description you are looking for an electronics engineer capable of designing a motherboard PCB according to all stated requirements. So, without further ado here's how the workflow would look like, if you happen to choose me as a partner for your project: 1. Schematic drafts based on proposed solution 2. Component library creation 2.1 Schematic symbol library creation 2.2 Footprint library creation 3. Schematic drawings 4. Review of schematic drawings 5. Layout design 5.1 Components placement and arrangement 5.2 Stackup configuration 5.3 Components routing 5.4 Review of final layout design 6. Final check, verification and validation 7. Production files (GERBER, NC DRILL, ASM, PICK & PLACE, STEP, BOM, SCH, 2D mechanical, 3D PDF) Delivery term could be further negotiated once I start working on the project. Don't hesitate to contact me with questions regarding any details around your project. You could also check out my profile on Freelancer for more details around my professional experience. I am looking forward to hearing from you soon. Thank you for you time. Kind Regards Martin K. P. S. I would allow myself suggesting hardware debounce circuits for all buttons. A software debouce approach is also applicable if production costs must be managed.

I am writing to express my interest in your project to design a motherboard PCB with a DC-DC converter. With my experience in PCB design and power electronics, I am confident that I can deliver a solution that meets your requirements. I will create a schematic for the motherboard, which will include the Rasberry PICO, Can PCB, 6 buttons, and 9 LED. The DC-DC converter will have short circuit protection, and the Canbus connector will include a TVS diode for protection against voltage transients. I will use my expertise in PCB design to ensure that the production files meet industry standards and that the board is optimized for efficient performance and reliability. I will also test the board thoroughly to ensure that it meets your requirements. I am committed to delivering this project within your timeline and budget. I will keep you updated on the progress of the project and ensure that the final product meets your expectations. Let's work together to create a high-quality motherboard PCB that meets your requirements! Best regards, Abbas

Hi,  Greetings! This is Lawrence. I have over ten years of expertise as a hardware design engineer, primarily in the design of circuit boards, and I'm interested in working on your board. Please contact me anytime to discuss more in detailed. Thank you. Best Regards, Lawrence

Good day, I can design motherboard PCB with a DC DC converter from 12V to 5V for you in a quality and timely manner. I have 30 years of experience in PCB, Rasbery Pico design and I am the best fit for your project requirements. I have seen the attached all images and pdf you shared and I will do this project quickly. I would like to have a thorough discussion on this project as there are certain suggestions from my side After dedicating more than 30 years to the electronics design and development, I am passionate in designing the best products Technology wise I have worked on all the latest technologies like GSM, 5G, Lora, Rasberry PICO, Buttons, LED, DC DC Converter etc. And have worked on more than 20 design tools for designing and simulation purpose Some of the generic queries from my side are: 1. What is the application of this product? 2. What will be the ambient temperature of this product? 3. What are the mechanical constraints to be taken care of? If you are someone who wants to benefit from my experience just message me Hi and I shall be there for you Regards Hari Mohan

I have more than 9 years experience in PCB design with eagle and altium design software with multiple layers . So I can do your job within a time limit with your sanctification.

s an Embedded systems Engineer with 5years experience in the field with very good knowledge on microcontrollers like esp32, arduino, stm32...etc, I also have experience in PCB design using Altium, kicad and Diptrace. I bid on your project because I have the expertise and experience in proteus and micro c to provide high quality work. I can achieve the results that you are asking for and test before delivering, I have all parts in stock for this. respond to the offer so that we can discuss details of your project. Thank you in advance. Best Regards.

Motherboard PCB, Rasberry Pico My name is Rabia Faisal, I am working in the writing industry since 2011. In this time, I have served countless clients with full amount of satisfaction by providing them TOP Quality Solutions. I have command on all references APA, Harvard, IEEE, MLA & Chicago etc. I will provide plagiarism free work with 100 percent accurate grammar within your given deadline. Please message me to get Top Class Services. I am waiting; https://www.freelancer.com/u/TopWritingGuru

Hello, I saw you need an embedded systems engineer for your PCB project. But IoT is special, and the success of your project depends on having solid knowledge in electricity and communications - so there's a lot at stake in getting this right, and imagine you're looking for someone who 'gets' how important this is to you. I focus on PCB and circuit design, but I approach it a little bit differently than most. Since my client's jobs are all about integrating their projects on the cloud, my job is to help them by producing professional designs that not only look great but also implement a design strategy that makes it easier to integrate your prototype with other technologies like cloud computing, data analytics, machine learning, etc. Over the last five years, I developed IoT projects based on microcontrollers like STM32(and other ARM Cortex M), ESP32, ESP8266, and SoM(systems on modules) like Raspberry Pi in C/C++(FreeRTOS), and sensors and actuators with interfaces such as i2C, SPI, UART, CAN, etc. which gives me the confidence I can help you. Best Regards Luis PS. Shot me a message with timeslots you're available today, and I can run you through it on a call together. I can also support you on the production of your PCB on prototype manufactures such as PCBWay or JBLPCB.

Hello sir, I have gone through the provided description and attached file in which you need to work on PCB board for DC-DC converter. Some of the details are mention in attached pictures but I need to discuss. Regarding the project details, I have some quick questions. 1-Can you please share the Schematic? 2-Please share PCB Board Dimensions. 3-Do you need to interface it with raspberry? I will provide you with the following deliverables;- • PCB Schematic • Components Placement • Design of PCB • Gerber file for PCB • BOM I have completed 20+ projects of Schematics/PCB Design, Coding, and 3D model of PCB using Altium, Eagle, Proteus, and KiCAD. I would be pleased to discuss this further and get started for you as soon as possible. Looking forward to hearing from you. SHYKH ABUBAKAR

Hello contractor, I have almost 10 years of experience in schematic and layout design. I am familiar with raspberry boards and I have designed many DC-DC converters before. I have used both Eagle CAD and Altium Designer for PCB design up to 8 layers and with high speed signals. I have experience with PCB manufacturing and I can offer support for complete PCB assembly, for both small scale or even series production if needed. Please check my profile for more background info and if you think I am a good candidate for your project, contact me and we can make it happen.

Hi there, I have read your description about the project. It is totally matches with my skills. I have developed PCB based on Raspberry PICO using chip RP2040. Also I have developed PCB based on CAN Bus using chip MCP2515. I have also have expertise in the Power PCB designing technique. I have worked with LDO like LD1085D2M33R, LM7805 etc I have worked with the MCU ATMEGA328P, ESP32-S2,S3,C2, C3 etc. Thank You

Greetings, Hope you are doing good. it will be an honor for me to be part of this project. I have carefully read the description along with the attached files and fully understands your requirements about PCB Designing. I am professional PCB Designer with 10+ years of experience, dedication and passion about my work and you will find me very reliable and flexible. Since I have designed several PCB Design projects until now using almost all the tools available. Some of my work done can be seen in the portfolio. So it would be quite easy for me to complete your project in the required time slot. I will provide all the necessary files which include Schematic, Gerber files, BOM, pick and Place, 3D files etc. If you award me the project, I’d be pleased to discuss this further and get started for you as soon as possible. Looking forward to your earliest response. Thanks in advance, Asif Ali

Hello there, I am a MEng. Electrical and Electronic Engineering (Electronic) graduate from the University of the West of England in 2019 and I have 3 years of experience as a Product development engineer in LE Robotics Pvt. Ltd., Sri Lanka. I have developed complete design of servo motor controller including the optimal servo motor design according to the company requirement, Controller PCB design including CAN, Power PCB design for Low power (48V DC) as well as High Power (230V AC), HMI, Absolute, Incremental, Multi-Turn Absolute encoder designs and Firmware for the system. Apart from that, I have experience in biomedical sensor development (EMG sensors, ECG sensors etc.), Power electronic designs (Switch mode power supplies, converters etc.) and many more. You can have a look at a sample in my profile portfolio. I have went through your attachments and I can provide you a quality product from my side if you give me this project. I have actively started freelancing recently. As a beginner, I am trying to build my reputation as a freelancer. Your task can be completed within the time limit with high efficiency if you hire me for the job. I can guarantee you a quality and ethical work from my side. I think I am a good fit for your job and waiting for your response. Best Regards Aloka Perera

Motherboard PCB, Rasberry Pico I am Minahil Hameed with a vast amount of experience in multiple fields like; Finance & Economics, Accounting & Cost Accounting, Business & Management, and Taxation & Auditing. I have achieved a great amount of success in this industry by providing TOP NOTCH solutions to my clients. I always provide quality services & respect to my clients because I consider him/her my BOSS. I provide a friendly environment to my clients so they always feel comfortable and openly discuss their requirements which allow me to produce MAXIMUM results...! Please visit my profile to see my reviews and samples. www.freelancer.com/u/writinglabb