Find Jobs
Hire Freelancers

PCB with WiFi and RFID

$250-750 USD

Closed
Posted over 5 years ago

$250-750 USD

Paid on delivery
We need a PCB for Access control, it should get via WiFi the NFC cards that have access, and open a relay when a NFC with access is detected.
Project ID: 17475186

About the project

25 proposals
Remote project
Active 6 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
25 freelancers are bidding on average $631 USD for this job
User Avatar
Dear Sir, I am an highly skilled board designer who has over 17 years experience on complex, multi layers PCB design. I can provide you with service from schematic entry to PCB Layout.I can also provide the prototype service. Please message me if you are interested or want to learn more. We can discuss further. EDA Tools: Altium17, Pads, Orcad, Eagle8.. Thanks
$750 USD in 7 days
4.9 (105 reviews)
8.3
8.3
User Avatar
Hi I am experienced electronics engineer with more than 8 years of experience. I have completed more than 200 projects here. Please review my profile to see the feedback from my previous employers. I am waiting for your reply to start Regards
$800 USD in 10 days
4.9 (187 reviews)
7.8
7.8
User Avatar
Hello! How are you?! I have 8 years experience as an electronics pcb design engineer. I have a lot of projects done that worked from the first iteration. Several of my projects are on my profile. Send me a message! Have a great day!
$800 USD in 5 days
5.0 (43 reviews)
7.0
7.0
User Avatar
Hi, I hope you are doing well. I have expertise in embedded system programming and development. I have worked with RF and WIFI based embedded device development. I have understood your project requirements and would like to discuss it further. Please send me message for further discussion. Looking Forward, Khawaja
$555 USD in 10 days
4.7 (49 reviews)
6.5
6.5
User Avatar
I have designed many types of PCB with the multiple layers. so I can do your job within a time limit with your satisfaction.
$833 USD in 10 days
5.0 (3 reviews)
4.3
4.3
User Avatar
Hello, Deep is here from India. Basically I'm Embedded System Developer. I have experience with various WiFi transreceiver, NFC/RFID reader-writer, Relay circuit. I can help you for PCB design.
$300 USD in 10 days
4.8 (10 reviews)
4.0
4.0
User Avatar
Hello Sir, its an easy task for me. My previous job was similar to your project which was a PCB of ESP12E(wifi), RC522(NFC/RFID)tag or card reader and a buck converter. please share more details like PCB power supply, size and shape, layers, text, and logo etc I have 4 years experience in PCB designing in EAGLE( single multilayer and flex) following are some examples of my work 1. ESP12E wifi + relay board + humidity&temp sensor Smart module 2. ESP12S wifi + relay board home automation board. 3. ESP12E wifi + RC522 RFID + BUCk converter module. 4. atmega328au + hm11(BLE)+ relays car actuator module. 5. atmega328au + nrf24l01 + relays smart switch module. 6. atmega328au + mpr121 capacitive touch smart remote. 7. amega328au + LCD display + hc06(later hm10) + amplifier + strain gauge water mapping module. 8. atmega328au + hm10(BLE) + gyroscope + reed sensor + battery charger smart skateboard module 9. Arduino Uno clone. I will provide you all necessary files ( gerber, smd-coordinate, BOM, Eagle(.brd& .sch) ). please, see my portfolio for more sample of my work. or initiate chat more detail discussion on your project. thanks.
$300 USD in 10 days
4.8 (14 reviews)
3.8
3.8
User Avatar
Sir, I have read your requirements and would like to inform you that I and my team can easily handle this task as we have proper experienced team for required technology also we have some sample projects to show you our work so kindly share your details or ping me to get started and have a discussion with our team. We do not charge anything if you are not satisfied with our work
$555 USD in 10 days
4.9 (6 reviews)
2.8
2.8
User Avatar
Dear sir I am a professional mechanical / Mechatronics engineer, i have previously worked and similar projects and i would like to help you in this project. I promise you a great output with a good budget, so dont worry about quality or money Contact me so we can discuss everything Best regards
$333 USD in 2 days
5.0 (2 reviews)
1.7
1.7
User Avatar
Hello! I'am an electronic engineer with over 3 years of experience in Embedded System and IOT solution. In addition, i have ability to carry out RF pcb, very suitable for your project. Please give me a chance and do not hesitate to get in touch with me if you have any questions. Thank you for your attention! Best regards Luke
$350 USD in 14 days
5.0 (2 reviews)
0.8
0.8
User Avatar
*** Already Work on NFC Based Application *** -> I have gone through your requirement of improving your existing NFC Based application. I already have worked on NFC Based Application and would like to discuss further. -> It would be appreciate if you can share your ideas and designs and source code with us so that we can have more idea and provide exact timeline and cost . -> I have 5+ years of experience in developing Mobile Application with emerging technologies, starting from Web, Enterprise Mobility, Augmented Reality / Virtual Reality, Cloud Solutions and Internet Of Things. -> kindly initiate the chat to discuss further. Looking forward to hear from your end. Speak Soon. P.S:- Amount mentioned in the proposal is just a placeholder.
$1,000 USD in 15 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello You can get this project READY MADE from me. I have already done this project in 2 parts WIFI and RFID. If you like I can provide you its Android App for FREE also. Even though I am new on Freelancer but I have more than 20 years of experience in Electronics and Embedded System design. You can see a DEMO VIDEO on my profile for the WIFI board also. I am confident that you would get the BEST PCB from me. Best Wishes Nuzcotek
$388 USD in 6 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi, Greetings from the leading Embedded service proving company from India. We have more than 10 years experience in Product Engineering field, having 45 + Engineers. I would like to hear from you regarding your Product requirement in details. I believe that Our team can able to deliver you best optimized product as per your requirement. We have rich experience in RF design and developed product for applications in IoT. Lets take it forward. Looking forward to your kind reply. Thanks
$555 USD in 15 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi I'm a PCB Designer and Hardware engineer for a company that develops E-Meters, I been working with NFC and RFID and several modules for wifi and Bluetooth , and Develop several PCBs with this Technologies, I been working in especially with NXP RFID and NFC solutions and design the PCB antenna, I have the sufficient experience with this system. Please take your time to chose the righ person for this job. Please feel free to contact me. Thanks in advance. Héctor A.
$666 USD in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have already build similar one for industrial automtion with long range rf communication remote control.
$611 USD in 10 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of GUATEMALA
Guatemala, Guatemala
5.0
16
Payment method verified
Member since Sep 29, 2005

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.