Mininet vlan jobs

Requerimiento Obligatorio : Hablar Español Configurar Mikrotik Conocimientos requeridos Switch Vlan Trunk Vlans Walled Mangle NAT Filter Rules PPTP - L2TP Certificados Radius USERMAN USERMANAGER

I have Cisco ASA 5520 Firewall and in that few VLANs are created. That is connected to Cisco 4948 where many devices are connected to the L3 Catalyst Switch under different VLANs. The engineer has configured VLAN previously and it was working... Now they seem to be screwed up and I am not able to ping or browse the other VLAN which I have been given permissions. This is simply few mins job for a techy person in networking... The person taking this product should have good knowledge in inter-vlan routing and vlan permissions as that is the one that need to be fixed. Thanks.

In SDNs I use mininet and create different topologies such as a tree, fat tree, linear, and others, connecting them with the Ryu controller to monitor flows. The switch I used is OVSK and the links are TC link with bw=0.01MBps, delay=1s, loss=50-90%, queue size=5-100packets, and use_htp=True. Also, change the used queue and Qos by "ovs-vsctl -- set Port s1-eth1 qos=@newqos .....". But when returning to the monitored flow I found that collision and Tx/Rx drop/error were always zero and did not change. The traffic generates using continuous ping, Iperf3, and python server and clients script. I need a dataset like the attached image that contains non-zero values for collisions and Tx/Rx drop/error monitored by the Ryu controller. I pay for the dataset and method. I will provi...

Setting up a Wan ethernet connection and aggregate 2 WANs Setting up lte 4g as a failover alternative Set up rdp with port forwarding Security on users entry Vpn between rdp users Vpn to othersites Setting up a vlan Prioritise Voip traffic with

I am looking for assistance with untangling firewall static routes configurations. I have a VLAN network which requires the creation of default static routes, and the details of these routes will be provided by me (the client). An experienced freelancer is needed to ensure that these static routes are properly configured. Please ensure that you are thoroughly familiar with this type of configuration and have previous experience with such projects. Flexibility and reliability are essential qualities that I expect from any contractor I choose. If you are interested in this project and have the relevant experience, I encourage you to bid on this project. Thank you. If you are not UNTANGLE Expert dont contact

I am looking for a talented freelancer who can help me with a project involving Mininet SDN, RYU, Python, and MongoDB. This project will require a deep understanding and knowledge of Python and a good understanding of MongoDB. I need someone who can help me develop my network topology and configure the communications between the components of the network using the Mininet and RYU controllers.

I need someone who can help me develop my network topology and configure the communications between the components of the network using the Mininet and RYU controllers.

need somone expert in Python and MongoDB start toyr bid with MongoDB

need somone expert in Python and MongoDB start toyr bid with MongoDB

- Tome en consideración la dirección IP asignada por su instructor LA IP ES: - Realice un esquema de direccionamiento IP en base a los requerimientos presentados para cada VLAN y enlace entre routers. Puede realizarlo a mano o en archivo digital - Implemente la configuración básica de los dispositivos de red - Implemente servicios de VLAN en los routers correspondientes - Implemente los diferentes tipos de InterVLAN que den solución y comunicación a cada sistema autónomo de la red - Implemente una ruta estática para comunicarse con el router ISP. Necesito un breve avance para el martes 21/03/2023 pero concluir el ejercicio el sábado 25/03/2023. Realizar la practica mediante estos videos de ejemplos;

In SDNs I use mininet and create different topologies such as a tree, fat tree, linear, and others, connecting them with the Ryu controller to monitor flows. The switch I used is OVSK and the links are TC link with bw=0.01MBps, delay=1s, loss=50-90%, queue size=5-100packets, and use_htp=True. Also, change the used queue and Qos by "ovs-vsctl -- set Port s1-eth1 qos=@newqos .....". But when returning to the monitored flow I found that collision and Tx/Rx drop/error were always zero and did not change. The traffic generates using continuous ping, Iperf3, and python server and clients script. I need a dataset like the attached image that contains non-zero values for collisions and Tx/Rx drop/error monitored by the Ryu controller. I pay for the dataset and method. I will provi...

I am looking for a talented freelancer who can help me with a project involving Mininet SDN, RYU, Python, and MongoDB. This project will require a deep understanding and knowledge of Python and a good understanding of MongoDB. I need someone who can help me develop my network topology and configure the communications between the components of the network using the Mininet and RYU controllers. Details and topology will be shared on request. Please share EOI. I am looking for a devoted freelancer who can help me create a successful project.

The project requires experience of SDN, Mininet, RYU python application development. This is the first of multiple tasks we need to get done (expect more work if you perform well). Details about the project will be provided to interested candidates. This project is required to be delivered in 2-3 weeks.

1. Assign the IP address to the designated interface as indicated in the diagram 2. Configure SW4 and SW5 as a server. Assign the VTP domain name as Seneca. 3. Create 3 VLANs on SW4 where VLAN 10 is the Accounting VLAN 20 is the sales, and VLAN 30 is the management VLAN. 4. Configure the trunk between SW4 F0/24 and R1 F0/0, Configure the trunk between SW4 G0/1, G0/2 and sw5 G0/1, G0/2 5. Configure ports F0/1 and F0/2 on SW4 for Accounting ports. 6. Configure ports F0/1 and F0/2 on SW5 for Sales ports. 7. Configure the MANAGEMENT VLAN 30 on SW4 and SW5 8. Configure OSPF as indicated in the diagram 9. Configure EIGRP as indicated in the diagram. Redistribute between OSPF and EIGRP 10. Once questions 1-9 have been correctly completed, all IP a...

Need one worked on mininet to generate ddos Attack and run my classifier to detect ddos

I have a ubiquity router that is currently configured with BGP and running IPv4. I need someone to add the IPv6 on the router and the Dell switch behind it so we can configure the machines on the switch with the public v6 IPs. I also need an additional v4 block added to our BGP with a new vlan created on the switch for the new v4 block.

...com/html/metronic/docs/general/datatables/server-side (must using json like example, ajax like example) (use php only to save output and generate ajax) with the fields: PAGE1 (identity): Name, Email, Company Database field: Name = Name Email = Email Company = Company PAGE2 (mac): MAC, EMAIL, VLAN, CREATED DATE. In page 2 email must be a search for email (page1) (not introducing manual email) Database fields: MAC = username (Mandatory) MAC = password (Mandatory) (YES, save twice MAC value in field username and password) VLAN = Tunnel-Private-Group-Id (MANDATORY) EMAIL = (OPTIONAL) When we create a new MAC we always save this two fix values (always 13 and 6): Tunnel-Type = 13 (MANDATORY) Tunnel-Medium-TYpe = 6. (MANDATORY) The create a new MAC and create a new identity mu...

It’s includes, Stacking, Vlan, Inter Vlan routing DHCP, STP, Link aggregation, Port security Total Network Size : 5 internal /24 subnets

Hello, I have a new firewall junyper SRX340 and need to configure it adding 1 vlan consisting on NATed 2 servers and finally configure a VPN to a remote location. I am stuck creating routing the traffic to the vlans and need inmediate remote help to assist me in configuration.

Hello, I have a new firewall junyper SRX340 and need to configure it adding 1 vlan consisting on NATed 2 servers and finally configure a VPN to a remote location.

Looking for an expert who had configured Network cards etc for PROXMOX server. Creating Bonds and VLAN aware systems. More on interest being expressed.

Hi, I am looking for someone who can help me with network planning, architecture and configurations for hosting 2 servers in a data center. The datacenter will give a Long range single mode fiber for internet connectivity. You will be required to recommend 1. which switch to buy ? 2. create configuration for switch and configure vlan for a public interface which will work on ipv6 3. a separate vlan behind a VPN to access management port of the servers.

Here are some requirement and directions for you: for example: cisco packet trace 1. 2 internal networks - separate IP addresses range Sales 100 IPs Production 300 IPs 2. Internal networs have to be in 2 separated VLAN 3. Propose hardware : Network equipment - routers, switsches 2x Mysql database server 4. Prepare logical infrastructure diagram for that network where you will provide: 3 level network - access layer, distribution layer, core layer uses those technologies Spanning Tree Protocol, Hot Standby Router Protocol, EtherChannel 5. Propose configuration of replication between two Mysql database servers some description for this 1. 2 internal networks - separate IP addresses range Sales 100 IPs Production 300 IPs 3. Propose hardware : Network equipment - routers, switsches...

Here are some requirement and directions for you: for example: cisco packet trace 1. 2 internal networks - separate IP addresses range Sales 100 IPs Production 300 IPs 2. Internal networs have to be in 2 separated VLAN 3. Propose hardware : Network equipment - routers, switsches 2x Mysql database server 4. Prepare logical infrastructure diagram for that network where you will provide: 3 level network - access layer, distribution layer, core layer uses those technologies Spanning Tree Protocol, Hot Standby Router Protocol, EtherChannel 5. Propose configuration of replication between two Mysql database servers some description for this 1. 2 internal networks - separate IP addresses range Sales 100 IPs Production 300 IPs 3. Propose hardware : Network...

I have a linux router setup that attaches 2 VLANS VLAN1 VLAN20 Interface 1 = ( VLAN1) Interface 2 = ( VLAN 20) I have IPv4 forwarding enabled on the linux machine. It is running Ubuntu 22.02 I have devices in VLAN 20 that sent out broadcasts with the bacnet protocol via UDP. When the linux router receives these broadcasts on interface2 ( ) I need it to send the packets out the interface on VLAN1 () to a specific host on VLAN 1 I need to know how to do this with either static routes and/or Iptables. The version of UBUNTU I am using uses NETPLAN for networking FYI. Please see an attached diagram. Thank you!

Details will be provided on request.

...switches with trunk (im guessing) and assign vlans in interfaces -Configure router1 with ACL to block vlans from pinging each other make router1 intervlan so it communicates from laptop vlan 100 with dns server vlan 120 router1 should have static routing to the webserver connected to router2 router1 must be connected to router2 with fiber and have media-type sfp -Configure router2 and router1 without default routes -Access point should be able to have laptops wirelessly connect to it and get vlan 100 assigned to them dynamicly Controller3 will also be wirelessly connected to access point with vlan 120 All this is configured in the WLAN controller the laptops must have a user and password to log into the WLAN -Configure the second webserver in the ...

Hello, We need to setup multiple public IP's to be routed(natted) to our pfsense server where th...setup and in use ) Router: TPLink ER8411 Omada. Full topology is made and very clear on how the internal setup is created and required. We need someone who has perfect understanding of how nat/routing works on this particular device and who has very extensive knowledge on how to pickup these IP's in pfsense and send them through the network. DHCP has to happen on router level. Only one subnet (vlan) is under the pfsense. Please don't reply interest if you don't know this specific hardware. We work in team by access through my computer. GMT+1 . Hourly rate 20 eur. ( Expected time frame. 1.5-2 hours maximum, for an expert it will be 5 minutes work, for which we ...

Please Sign Up or Login to see details.

An implementation of the topology between four locations with a dhcp, dns, vpn between the locations, Qos and Firewall

I want to route three things across one ge-0/0/x port to public internet on an SRX-345: 1. a management vlan-tagged traffic on unit 0 NAT'ed to mgmt port/subnet, regular traffic on unit 1 NAT'ed, and transparently route a public static 1.2.3.5/27 on unit 2. I have attached a network diagram (though it doesn't show the management vlan. I can use multiple ports if necessary, but would prefer one. I have all the NAT'ing done and traffic is flowing fine, I just don't know how to add the public static transparent route.

bgp bonding vlan routing Switch configuration using protocols

Need to assist in setting up C9300 series Switches with network routing, VLAN, Link aggregation and etc. The candidate must come into my office to do the job physically in Singapore.

An implementation of the topology between four locations with a dhcp, dns, vpn between the locations, Qos and Firewall

I need someone to help us figure our a network issue with Proxmox. We run Proxmox VE with only one VM, on that one VM, there is Centos with Cpanel and everything works well untill we need to communicate with another machine in another Vlan in same server room via an SDK. When we try to access to the machone from the VM (centos) it does not work, we do not ping BUT when we go through Proxmox VE console, we ping everything we need. This might be an error with the bridge. Thank you,

Coniguration of 10Port ZTE Switch. Requirement Port 10 is WAN Uplink Port 9 is WAN Forwarding Port 8 & 7 to be attached with WAN Pool. We need to pick WAN from Port 8 and Give Back LAN to any of Remaining Ports So making 2 VLAN Pools. 1 for WAN and 1 for LAN Port 9 should Carry 2 way Traffic of Both WAN and LAN ( with DHCP ) but No other port should mix

I need to deploy 135 docking stations for people to drop-in to work at. I want to run a script to release and renew IP, ping two test printers on the same VLAN as the dock. Normally I deploy 1-10 workstations, so it is easy to run command prompt: - ipconfig /release - ipconfig /renew - ping - ping Now with this large deployment I want to streamline my process. Please see the ValidationWinForm attached: I'd like the following to run locally on my laptop when I click the "Start Validation" button. - ipconfig /release - ipconfig /renew - ping - ping End result that I need to document for this (and other deployment): Save the new workstation number to cell 1 of xlsx or csv file Save new IP address to cell 2 Save ping test result

Provide mininet topologies with High level API. IP subnet should be Linear topology with one switch and 5 hosts Tree topology with 3 levels deep provide outputs with a screenshot: Provide all nodes in the topology Provide all nodes interconnection _________ Provide default mininet topologies as below: Minimal topology Reversed topology with 6 hosts Tree topology with two level switches and three hosts in each switch provide outputs with a screenshot: Provide all nodes in the topology Provide all nodes interconnections

Provide mininet topologies with High level API. IP subnet should be Linear topology with one switch and 5 hosts Tree topology with 3 levels deep provide outputs with a screenshot: Provide all nodes in the topology Provide all nodes interconnection _________ Provide default mininet topologies as below: Minimal topology Reversed topology with 6 hosts Tree topology with two level switches and three hosts in each switch provide outputs with a screenshot: Provide all nodes in the topology Provide all nodes interconnections

configure the various networking devices in a newly designed network infrastructure for a new company. The company Building has hosts from another 3 different networks (VLAN 10, 20 and 30) along with multi-access network and WAN networks. The edge router R1 connects to the ISP router (which is not a real router but a loopback interface with IP 1.1.1.1) to get internet access.

...have opportunity. What I expect: You will come online and in a voice call you will guide me all options available to configure. You will advise me to make things available to setup our test environment before starting practical learning. Here are menu options that I can see in HP and we will be exploring: - Device ○ Port Management ○ Port Mirroring ○ RMON ○ SNMP - Network ○ VLAN ○ VLAN Interface ○ MSTP ○ Link Aggregation ○ LACP ○ LLDP ○ ARP Management ○ ARP Anti Attack ○ IGMP Snooping ○ MLD Snooping ○ IPv4 Routing ○ DHCP ○ Service ○ Diagnostic Tools - Authentication ○ 802.x ○ Port Security ○ AAA ○ Radius - Secuirty ○ Port Isolate Group ○ Authorized IP ○ Loopback Detection - QoS ○ Time Range ○ ACL IPv4 and mo...

Hi all, I wanted to set up a Mininet-Wifi topology consisting of one station, one controller, access point and 4 servers.

I wanted to set up a simple topology in Mininet-wifi and enable client-server socket programming to send and receive data. I have already written the basic script which send and receive packet in python. I wanted to enhance this script and enable to run this over the Mininet-wifi.

Requirement: - 1. Centos Linux 8 expert 2. Multiple VLAN troubleshooting 3. Nutanix VM 4. Linux Jump Host Project Task: - - To troubleshoot network interface inside centos Linux 8 servers with multiple VLAN interface - ALL VLAN need to communicate with VPN user - Previously this was working, however after a server crash and restoration this wasn't working. Issue: 1. Centos Linux 8 server unable to route at the same time to reach its respective gateway a) interface VLAN1410 -public IP - success, ip 121.123.x.x b)interface VLAN134 - internal LAN - fail to access via VPN, ip c)interface VLAN115 - internal LAN - fail to access via VPN, ip 2. VPN user can ping the gateway ip from all VLAN 3. Public access can reach to interface VLAN1410 4. Whe...

Good Day, I small business setup in my home, I have done a lot of to get to this point and I feel like I am missing a few things. 1. IoT vlan created but need someone to help complete 2. Firewall LAN IN advance setup a. firewall rules for my network b. more secure infrastructure than I currently have 3. Port Forwarding advance setup a. I have ran into conflicting ports on multiple servers b. better understanding of my current setup Thank you in advance, Nelson

I have mininet .py script i have question and maybe to modified it I have two things why it is (mininet>) not showing and why all IP hosts change the script should be changed only the sected host IP from

I have mininet .py script i have question and maybe to modified it The ((mininet>>) path not display how i can Show it see the attached

I need someone who is well conversant with mininet to help me build a simulator

Please Sign Up or Login to see details.

SDN with Mininet. Traffic control