Pic18f ethernet bootloader jobs

Develop software that can run on a single board computer that will form a proxy server function communication over ethernet or Wi-Fi to electric vehicle chargers (EV Charger) using the OCPP protocol developed by the EV Industry (OCPP 1.6). The EV chargers will be set or programmed to address all communication through the ethernet or Wi-Fi to the single-board computer. The single board computer with pass through all messages received from the EV chargers to an OCPP server whose address can be set by users The single board computer and software will also communicate via an RS485 port using Modbus protocol to electricity infrastructure to receive the Amperage being used (there will be 3 values Phase A, Phase B, and Phase C. The single board computer and software will be progra...

its about internet radio player esp32 based it works well just need few improvements using Arduino IDE: 1- Make changes to code to have it working with ethernet too on ESP32-POE (for now code works with wifi only ESP32-DEVKIT 38 pin version board) 2- Add password to webpage. 3- Make possible to use Spotify Playlists and Albums.

Need to add few features for existing ESP32 online radio sketch, using Arduino IDE. 1- Make changes to code to have it working with ethernet too on ESP32-POE (for now code works with wifi only ESP32-DEVKIT 38 pin version board) 2- Add password to webpage. 3- Make possible to use Spotify Playlists and Albums.

...of an experienced Android developer who has knowledge and experience with unlocking the bootloader on a Mediatek chip Android device. Requirements: - Must have experience working with Mediatek chip Android devices - Knowledge and understanding of the bootloader unlocking process - Familiarity with the specific make and model of the Android device - Ability to troubleshoot and resolve any issues that may arise during the bootloader unlocking process Responsibilities: - Unlock the bootloader on the specified Mediatek chip Android device - Provide detailed instructions and guidance on the process for future reference - Ensure that the device remains fully functional and operational after the bootloader is unlocked Skills and Experience: - Strong under...

Have computers that I need to rebuild and if I build them over the network; have you done that? do you have a way to I can boot over the network to a server setup to build the ISO Have a way we can screen share ? There is hope you can give your “best” price; unemployed, and have cancer with bills backing up, $10 possible? Please note $10 is the max total that I can handle for this (doing hourly reduces % fee). Will leave a Glowing paragraph of feedback 5 stars : - ) My funds are low but will pay quick and leave 5 stars. Please give your best possible for your bid ? (something reasonable?) Please note there is hope we can mutually complete this task; we can leave each other nice comments and 5 stars for each? Look at feedback on my profile, feedback I left for many other...

...Pro Tools. The plugin should have the capability to communicate with an external program using Midi SysX or Ethernet. Skills and Experience: - Proficiency in Pro Tools and DAW plugin development - Strong knowledge of Midi SysX or Ethernet communication - Experience in creating synthesizer, mixer, or EQ plugins - Ability to work within a budget of more than $1000 If you have the expertise and experience in developing DAW plugins and are familiar with Pro Tools, Midi SysX or Ethernet communication, and have a track record of creating plugins I would love to discuss this project further with you. Payment I propose staged payment Specification Using Midi SysX or Ethernet agree with us a suitable protocol (for example Midi Machine Control) ...

I recently switched broadband providers and the setup I have is like this: main router connected upstairs, 2nd router downstairs connected via Ethernet port (lan to wan) to the main router. Prior to switching providers all was working ok after the switch 2nd router stopped working and I’ve been trying to figure it out to no avail. Need someone to help me set it up and get it to work. Can’t pay you for it if it does not work

design a kiosk stand, main parts. 1-Power plug 2- power switch 3- ethernet port 4- usb sd cart redear 5- vesa mount for screen 6- rfid reader 7-software will be used is solidworks 2023 it will build using 1.2-1.4mm sheet metal the final model will be cut and laser welded ( exporting all part and make sure it fits correct )

design a kiosk stand, main parts. 1-Power plug 2- power switch 3- ethernet port 4- usb sd cart redear 5- vesa mount for screen 6- rfid reader 7-software will be used is solidworks 2023 it will build using 1.2-1.4mm sheet metal the final model will be cut and laser welded ( exporting all part and make sure it fits correct )

I need someone who have experience in avoiding root detection on android. There is android app that can detect almost all roots that i have already tested (Magisk, Magisk delta, shamiko, safetynet fix), when i open it, it is closing immediately with message that its detects magisk / unlocked bootloader. I test it on various of Google Pixel smartphones (from GP 1 to 5, from android 8 to android 12) So, the main goal is to have root and make possible to successful run the app.

...items are stated below in Attachment A – Specification of Requirements. Project Objectives: The EVO servers would consist of two (2) 16 Bay EVO Base Unit – Shared Storage for Media Teams with 192TB raw capacity, 3U, 16 Bay, 64-bit multi-core Xeon CPUs, Disk architecture support for 12Gb/s SAS or 6Gb,s SATA, NAS and SAN storage Subsystem, support for SMB, AFP, NFS, SFTP, FTP ,iSCSI, two (2) 1GbE Ethernet ports, two (2) 10GbE Copper. This will include two (2) NVIDIA Mellanox MCX516A-CCAT ConnectX®-5 EN Network Interface Card, 100GbE Dual-Port QSFP28, PCIe3.0 x 16. The EVO is a complete, networked, high-performance shared storage workflow server for professional media artists. The hardware and EVO OS are designed for video/film/TV, graphics, VFX, animation, audio...

Find fix to problem of "ETH not working on our Custom board using LPC1758 "based LPCExpresso LPC1769 board. Our board uses LPC1758, Initial rev boards worked all good. ( Even though  MIDO, MDC is funstion are not available on 1758) On Next revision boards ETH does not work. ( No change was done to schematic except fixing  SCL, SDA for I2C bus) Debug halts at following line; in void Chip_ENET_Init(LPC_ENET_T *pENET, bool useRMII) /* Initial MAC configuration for full duplex, 100Mbps, inter-frame gap use default values */ pENET-> = ENET_MAC1_PARF;

...fixing/altering consumer records and communication. -Making entries from our financial software into google sheets. Timing: Full-Time Monday to Friday & Part-Time Monday to Friday KPIs: Ensuring quotas are being fulfilled on time with the desired quality and that the payment entries from our software are carefully submitted in google spreadsheets. Requirements: ● A stable internet (preferably ethernet with an ideal speed of 10mbps) ● At Least core i5 4th gen laptop ● Electricity backup ● A good noise canceling headset (optional not required) Important Notes: ● One month training will be provided ● One month probationary period ● 10 Medical Leaves, 20 Annual Leaves Qualitative Aspects -Self-managed and driven -Organized -Works with high-quality standard -Work ethics is ...

We are looking for several online interpreters for different language pairs to work in US timezone. Calls are various including medical, educational, social services, business settings... (there are training if you don't have experience yet) Requirement: - Technical stuffs: Ethernet, USB headset, computer - Language: advanced level in speaking and listening

...MYC-Y6ULY2-V2-4E512D-50-C, 512MB RAM variant. The datasheets and some reference schematics are available on the MYIR website. There is a development board based on this SOM whose schematic is also available. - The following are the requirements for the product, and need to be attached to the SOM making sure all rules are followed (as per the datasheet) o 4USB Ports (may or may not need a 4usb hub chip) o 1 Ethernet Port o WIFI Module o 12v Power Input (Refer Development board schematic) o 1 Momentary Push Button o 2 RGB LED o (Micro USB port/Type C port for flashing the code) o SD Card for development variant LINKS TO DATASHEETS: MYC-Y6ULY2-V2-4E512D-50-C Overview : Mouser Product:

I am looking for an experienced embedded Linux developer to help me with my project. The target hardware platform is the Raspberry Pi, and I need a custom bootloader with features for network booting, encryption support, as well as an IP discovery tool. The project must be completed within 3 months. I need a talented developer who can leverage the Yocto project to create the custom bootloader and get it up and running. The bootloader should be tailored to the specific needs of my project. Furthermore, I would like support for debugging capabilities should any issues arise during the development cycle. I'm looking for a reliable and experienced developer who can work within my specified timeframe and deliver an exceptional product. If you think you have the ...

My project requires a network port tool with specific functionality. It must be able to perform port scanning, port forwarding, port monitoring, and display LLDP and CDP neighbors. Additionally, I do have specific requirements for the tool's user interface. Lastly, I need the tool to be compatible with both Android and iOS operating systems. I am looking for a talented fr... Lastly, I need the tool to be compatible with both Android and iOS operating systems. I am looking for a talented freelancer who can develop a top-tier network port tool to meet all these requirements. The project should be completed quickly, accurately, and securely. If you have the skills and qualifications to fulfill this job, I would be delighted to hear from you. the phone should use a ethernet inter...

Optomize my rogers intwrnet and home network. I also have a mesh systems My rogers is 1GB, i am always getting under 500 GB max, but usually between 250 and 350. Happy to move things around. 3 weeks ago, when the kitchen was gutted I ran spme ethernet cabels downstairs and upstairs. I dont trust Rogers. When we had digital cable, internet, home phone, and secure home, the tech said the rongers lines can handle all of them. I had to pick prority and they used splitters to maximize signals for each service. Happy to pay for your experence and expertise, as you are a professional.

We have flutter app POS and the app was finished , but we need to generate POS Invoice using flutter with printer Ethernet IP not USB

I have an IoT device, Rasberry Pi which has ubuntu 20 ... the device is connected to PLC via Ethernet and to cloud server via Wifi ... The Wifi connectivity is limited to only the IoT cloud server. The issue is basically metrics of Wifi is 20100 while that of Ethernet is 600, because of this Rassberry pi is not able to connect to the IoT server. I am looking for an expert in Ubuntu netplan to help me configure my network. I have a detailed plan in mind for setting up my network interfaces (Wifi and Ethernet), with Wifi having a higher priority. The primary purpose of the network configuration is to optimize performance. The project is urgent and needs to be completed within 1 week. Ideal skills and experience for this job include: - Expert knowledge in Ubuntu net...

I need to simplify this design to include minimum components and reduced layers so PCB can be printed using online service We want just power, 1 usb, HDMI and ethernet/wifi input which ever is simpler other interface can be removed to reduce the complexity Further details will be provided through chat

... Responsibilities: Design and develop a secure and efficient bootloader for the STM32L151CCT6 microcontroller, which will reside in a separate partition in the flash memory. Create three separate sections within the device's flash memory: one for the bootloader, one for the currently running application firmware, and one for incoming firmware updates. Implement a mechanism in the bootloader to verify the integrity of the new firmware before applying the update, such as a checksum or CRC. Develop an OTA update mechanism that can receive and store incoming firmware updates (received via MQTT from AWS IoT Core) in the dedicated update partition of the flash memory, without disturbing the current firmware. Ensure the bootloader applies the new firmware ...

Do you know why am measuring resistance ACROSS differential pairs? (eg. between pins 2 and 6) Help debugging a PCB with ethernet port (support over chat)

Possession of STM development Board with Cloud Ethernet connectivity is a Must Extensive Knowledge of all STM development tools is a MUST NUCLEO-F303ZE Must have in possession so that we can work on the same identical proto board to speed up development and testing We need a simple 16 port HI/LOW GPIO isolated transistor output (simple ON/OFF) but it has to be from remote Cloud service and it must have option to also have local Network/Intranet locked connectivity We also need ADC data from as many as 8 input ports, this data will be sent to the cloud for processing and needs to be visible locally stored temporarily for up to 120 hours internally and also sent to the Cloud Simple GUI will suffice for testing, API will need to be created and well documented We are not look...

I am looking for an experienced Android developer to modify the code to allow for multiple Ethernet and WiFi connections to be established and used simultaneously. The primary purpose of this modification is to support a specific use case or application. The deadline for this project is urgent, with a timeframe of 1-3 days. Ideal Skills and Experience: - Strong experience with Android development - Expertise in modifying code - Knowledge of Ethernet and WiFi connections - Ability to work under tight deadlines and deliver high-quality work quickly

I am looking for a skilled professional to reconfigure the RS485 ports on a set of 2 PLC devices. For this project, I will be using a new "RS845 to Ethernet" gateway, connected to the RS285 ports in order to send data via MQTT protocol., and in order to store it on cloud Influx DB. PLCs were installed in 2012. Not to much documentation available. I require to find to the way to diagnose and set up the two RS285 ports, to be completed in less than a day. At the moment, It seems the ports are nor sending data. So I am looking for someone who is experienced on PLCs setups and available to work quickly and efficiently. If you have the required skills and equipment to do this job in a timely manner, I would be very glad if you would apply.

I am in need of assistance with bootloading my ATmega256 Arduino through the ICSP port. I have a specific bootloader in mind and require guidance in implementing it. I prefer to use a programming language other than C++ or Python. Additionally, the ATmega256 will be integrated into a device that falls under the "Other" category. Ideal skills and experience for this project include: - Extensive knowledge and experience with ATmega256 Arduino bootloading - Proficiency in a variety of programming languages - Experience integrating ATmega256 into devices beyond robotics or home automation

I am needing an expert in dd-wrt to setup a router/switch. If you don't know what dd-...finding. I have a router setup with the latest dd-wrt firmware, but am having trouble with the custom setup. I am joining 2 sites/networks, each with their own gateway, and own DHCP server. What is needed is; 1) Disable DHCP server on the switch/router (already done) as DHCP server is elsewhere on local network 2) Setup the 4 lan ports as a ethernet switch (currently doesn't seem to work as a switch/router) 3) Setup one lan port, or the WAN port (as local ethernet port) to block all incoming and outgoing DHCP request 4) Setup Wifi to connect to and allow DHCP requests from local network See attached diagram I have access to the GUI and hope that using Teamviewer would be suffi...

...with experience developing Embedded Linux Kernel & Rootfs compiling for an IMX6 SBC. The SBC manufacturer has already provided the kernel sources as well as rootfs sources along with instructions. The uboot sources are not provided. I need someone who can do some minor customisations with the kernel and file system to improve boot time, to add facility to automatically update the firmware using ethernet, to change the debug serial port to some other port. To configure other pins for GPI/Os etc. Candidate with suitable experience only apply. Need to get this done in 1 to 2 weeks time. The Details of the Single Board Computer are as follows: CPU: Architecture: Cortex-A7 Frequency: 528MHz RAM: 256MB DDR3 ROM: 256MB NandFlash System: Linux4.1.15+QT5.6 LCD: 4.3" &a...

...Administration & Support - Azure Virtual Desktop, Administration and Deployment - Extensive PowerShell scripting - Windows Server (2008, 2012, 2012 R2, 2016, 2019) - Ability to learn and manage applications in an enterprise environment - IT Security solutions and applications ===== PLUSES===== - Programming and development experience (C, C#, Python, etc.) - Knowledge of internet firewall and Ethernet switching in a business environment - Proficiency in: GP's, Basic TCP/IP switching and routing and firewall knowledge, security - Virtual Server (VMware/Hyper-V) - AWS Cloud Experience (Deployment, Administration, Support) - Sophos IT Security (Deployment, Administration, Support) - Certifications: MCSE, MCP and related vendor certs and specialties (experience and aptitude ...

I tried a couple of days and I could not unlock the bootloader According to my researches, this version is made for Korean and unlock the bootloader is not possible: So I need your help with the validated steps to unlock the bootloader of this smartphone I'm using linux, I'm experienced with ADB, fastboot, TWRP, root, etc. In the past I flashed several androids, but this model is a challenge. The test, should be a video call using google meet in which you should guide my step by step to unlock the bootloader. I achieved only upgrade from android 6 to android 7

Windows 2012R2 handling Exchange server 2016, with Kaspersky Anti-Virus, the USB ports not functioning on the login screen, and the NIC's Teamed without IP assigned, i was working via RDP and create NIC's Teaming, after that the RDP disconnected, then went phisically to server to assign the IP but surprised when found the USB not functioning and the Ethernet not optaining IP's to access it. I need figure out the NIC's to assign IP address and/or enabling USB with care to the OS.

Hi, I am looking for a freelance PLC programmer to support me with my project. I want to program an Allen Bradley PLC that will be used for machine control. In terms of communication protocols, I wish to use EtherNet/IP. Previous experience working with these protocols is a must. If you have worked with similar projects in the past or have the necessary skills, I would be interested in hearing from you.

Freelance Proofreader – Various Shifts Available National Advertising and Direct Mail Company seeking proofreaders fo...Communications OR similar work experience • Flexible work schedule • Must be fully set-up to work from home and meet all applicable software and hardware requirements if applying for remote freelance position IT requirements: Mac (OS 10.11 or higher) or PC (Windows 7 SP1, 8.1 & 10) High speed internet access on a MAC/PC minimum of 20 mbps (test ) Preferred directly connected via Ethernet • Experience with Direct Mail Advertising a plus, but not required • Bilingual in English & Spanish languages a plus, but not required • Proficient in MS Office Interested applicants should respond with resume, salary requirements and avai...

I am seeking a technical writer and system improvement expert to help me with my project. Specifically, I need help with improving the software aspect of the system which includes C, Vivado, Python, and Ethernet. The ideal candidate should have experience with VHDL and ZedBoard at an intermediate level. The following skills and experience are required for this project: - Technical writing for system documentation - Knowledge of software (C, Vivado, Python, Ethernet) - Intermediate experience with ZedBoard and VHDL If you possess the above skills and experience, please apply for this project.

Hello! I'm looking for someone to help with a project monitoring weight and temperature (modbus rtu). The device used to monitor will be an Arduino, and the communication protocol required for MQTT is Ethernet. Data will need to be published to MQTT at a rate of every minute. Please let me know if you have experience with this type of project or have any questions. Thank you!

I am looking for a freelancer who can assist me with technical writing for my project that involves the use of Zedboard SoC, ADC, filter, ethernet, and Python code. The desired end goal of the project is to write a technical report with a detailed explanation of the project. I will need assistance with coding in Python to communicate with the SoC and computer. The technical report should include a detailed explanation of the project, including the use of Zedboard SoC, ADC, filter, ethernet, and Python code.

need engineer to do schematic design of audio product. I2S audio inputs, TDM8 audio outputs with STM32H747. The STM32H747 needs ethernet connectivity, touchscreen, flash, RAM, AD converters and DA converters. (please see attachment). Project involves doing schematic design, PCB layout, and bringing up the firmware to run the micro and initialize all chips to pass audio from all inputs to all outputs. Follow up project will be doing code for the touchscreen and further enhancing the audio processing and adding ethernet control

I need to setup a windows computer to route traffic between ethernet network and wifi network so that clients on the ethernet network can connect to the internet on the wifi network

I am looking for a developer who can work on my project to develop functionalities for ESP32 through HTTP POST/GET requests. The project requires the use of Wi-Fi and Ethernet, and routines for Wi-Fi network auto-configuration. The timeframe for the completion of this project is a priority as I have a deadline. The level of complexity for the required functionality is advanced, so I am looking for a developer with experience in advanced programming. The ideal candidate should be comfortable working with Arduino IDE.

I have a complex assignment due and need a tutor to help me with my project. Embedded systems project with PIC18F4520 microcontroller

...should be used throughout the zoo to provide a high level of control and visibility over the network. Switches with Power over Ethernet (PoE) capabilities should be installed where devices like wireless access points, IP cameras, and VoIP phones will be connected. These switches will enable efficient power management and centralized control of the network. 3. Wired Workstations: Each office and service area within the zoo should have wired connections for workstations, including desktop computers, printers, and other peripherals. These connections will ensure high-speed and reliable access to the zoo's internal systems. Wired connections will be provided through Ethernet cables connected to the managed switches. 4. Wireless Access Points: To provide wireless connectiv...

I want to communicate with a Logic controller (Phoenix Contact make) ILC 131 ETH, the controller stores the values in an array from 1 to 100 and reads the database of an array from 101 to 250 (this is for instance only). Read & write from and to the controller using TCP/IP Ethernet protocol. I need to get it communicated to our vb.net project, read and write both. In the logic controller, we have assigned the IP of PC, and the logic controller has its own static IP. I should be able to read the array to my .net project continuously e.g. each 500 ms the data should be refreshed so that it will be like live data viewing (streaming). if you need any further information, kindly revert I will be glad to share with you. the project should be in .net and with source code as well.

It needs network, control of DSP chips via I2C, presets, and UART and bootloader and firmware update process. We have the code for Freescale chip in C, and it works perfectly but code needs to be moved to STM. Please apply if you are experienced and confident.

...status LEDs for upload and operation. Four relays capable of handling NO - COM 24 Volts AC / 1 Amp max. (pins defined by designer) Rectifier bridge to convert 24V AC input to 12V DC / 3.3V DC. Temperature and humidity sensor: Sensirion I2C SHT31-DIS-B2.5kS. VOC sensor: Sensirion I2C SGP40-D-R4 (with a different address on the same bus). SMD components and a rectangular PCB no larger than 60x60mm. Ethernet interface with port( preferebly use LAN8720) have an Waveshare 2.13inch E-Ink Display Module connected to the ESP32 Deliverables: Schematic and PCB layout files in Eagle or another industry-standard format. BOM with Digi-Key part numbers and all necessary information for ordering components. Gerber files and any other necessary files for PCB fabrication. A brief document expla...

Hi, I'm reaching out from a company called Keycafe () We create electronic Smart boxes for keys so that car-sharing companies, apartments, or even vacation rentals can have a place to check keys in and out. Our Smartbox connects via cellular, WIFI/Ethernet, we would like to do some testing on the WIFI and cellular at one of our locations. You'll take notes and provide us with feedback as to how the system is operating. This will require an ON-site visit. The client is located in New Hampshire, US.

So in short I have a system similar to foodpanda, Uber eats and so on. The restaurant have a tablet or similar in the place. I need the possibility for a Thermal Printer to connect to it. It's a Progressive Web App (VueJS+Quasar). Currently we have a RPI as a gateway locally, we want to remove that. It could be direct Ethernet connection from web to printer, or through BT or both. Printers could include Epson TM-T series, Bixolon and Star Micronics. The ideal solution should support multiple solutions. So there are some possibilities: 1. Look at and their plug-ins for what has already been created or used () 2. Foodooma also has a thermal printer module: ()

Need comparison document between these 2 switches. And want to find out, what are the shortcomings of perle in comparison to cisco. I'm looking for someone to compare a Cisco and Perle switch in terms of functionality. The comparison is to be formatted in list form and should include research in addition to the data that I provide. I'm looking for someone who is experienced in switch comparison to ensure accuracy of the comparison. My goal is to ensure that our products are correctly compared in order to make strategic decisions with the business. The successful person will

We have a role available for the design and development of electronic module(s) that covers the following subject matter. • High performance microprocessor and associated interfaces including some graphics processing • Later generation PCIe, Ethernet PHY for 10/100 operation and other high speed serial interfaces • Performance memory selection • Robust data credibility monitoring • Highly deterministic system reset strategies.

...simultaneously be accessed via Wifi and/or Ethernet. This USB dive will be plugged into the USB plug on a computer/device which will be writing data to it. The files are each up to about 1Gb in size, and then the file is closed and another file will be written. Once each file has been written to the USB drive, I need to be able to access it over Ethernet or Wifi. The existing products on the market allow for either connection via USB or Ethernet/Wifi - but not simultaneously. The reason for simultaneous operation is for timeliness of data, I need to be downloading the last file while the next file gets written. These are large files and I need to do processing on them while the next file is being written. Note, that if you can get it working on Ethernet, we...